| Class | ground_file_io |
| In: |
io/ground_file_io.f90
|
Note that Japanese and English are described in parallel.
海面温度や地表面諸量に関するデータを NetCDF ファイル, もしくは surface_data モジュールから入力します.
Data about sea surface temperature (SST) or various values on surface are input from a NetCDF file or "surface_data" module.
| GroundFileGet : | 地表面データファイルの入力 |
| ———— : | ———— |
| GroundFileGet : | Input ground data file |
| Subroutine : | |||
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_SurfAlbedo(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_SurfHumidCoeff(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_SurfRoughLength(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_SurfHeatCapacity(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_GroundTempFlux(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| ||
| xy_SurfCond(0:imax-1, 1:jmax) : | integer, intent(inout), optional
| ||
| xy_SurfHeight(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
|
地表面の諸々のデータを設定します. xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.
Get various data on ground. Arguments excluding "xy_SurfTemp" are configured at first only.
subroutine GroundFileGet( xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoeff, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_GroundTempFlux, xy_SurfCond, xy_SurfHeight )
!
! 地表面の諸々のデータを設定します.
! xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.
!
! Get various data on ground.
! Arguments excluding "xy_SurfTemp" are configured at first only.
!
! モジュール引用 ; USE statements
!
! 地表面データ提供
! Prepare surface data
!
use surface_data, only: SurfDataGet
! gtool4 データ入力
! Gtool4 data input
!
use gtool_history, only: HistoryGet
! 文字列操作
! Character handling
!
use dc_string, only: toChar
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(inout), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
real(DP), intent(inout), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
! 地表アルベド.
! Surface albedo
real(DP), intent(inout), optional:: xy_SurfHumidCoeff (0:imax-1, 1:jmax)
! 地表湿潤度.
! Surface humidity coefficient
real(DP), intent(inout), optional:: xy_SurfRoughLength (0:imax-1, 1:jmax)
! 地表粗度長.
! Surface rough length
real(DP), intent(inout), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
! 地表熱容量.
! Surface heat capacity
real(DP), intent(inout), optional:: xy_GroundTempFlux (0:imax-1, 1:jmax)
! 地中熱フラックス.
! Ground temperature flux
integer, intent(inout), optional:: xy_SurfCond (0:imax-1, 1:jmax)
! 地表状態 (0: 固定, 1: 可変).
! Surface condition (0: fixed, 1: variable)
real(DP), intent(inout), optional:: xy_SurfHeight (0:imax-1, 1:jmax)
! $ z_s $ . 地表面高度.
! Surface height.
! 作業変数
! Work variables
!
real(DP), allocatable, save:: xy_SurfTempSave (:,:)
! 地表面温度の保存値.
! Saved values surface temperature
logical, save:: flag_first = .true.
! 初回を示すフラグ.
!
! Flag that indicates first loop
! 実行文 ; Executable statement
!
if ( .not. ground_file_io_inited ) call GroundFileInit
! 初回はデータを読み込む
! Load data at first
!
if ( flag_first ) then
! 地表面温度の保存用変数の割付
! Allocate a variable for save of surface temperature
!
allocate( xy_SurfTempSave (0:imax-1, 1:jmax) )
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
call SurfDataGet( xy_SurfTempSave, xy_SurfAlbedo, xy_SurfHumidCoeff, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_GroundTempFlux, xy_SurfCond ) ! (out)
! 地形はデフォルトでは平坦
! Geography is flat by default
!
if ( present(xy_SurfHeight) ) xy_SurfHeight = 0.0_DP
! データをファイルから取得
! Data is input from files
!
if ( trim(SurfTempFile) /= '' .or. trim(SurfTempName) /= '' ) then
call HistoryGet( SurfTempFile, SurfTempName, xy_SurfTempSave )
end if
if ( trim(AlbedoFile) /= '' .or. trim(AlbedoName) /= '' ) then
if ( present(xy_SurfAlbedo) ) then
call HistoryGet( AlbedoFile, AlbedoName, xy_SurfAlbedo )
end if
end if
if ( trim(HumidcoeffFile) /= '' .or. trim(HumidcoeffName) /= '' ) then
if ( present(xy_SurfHumidcoeff) ) then
call HistoryGet( HumidcoeffFile, HumidcoeffName, xy_SurfHumidcoeff )
end if
end if
if ( trim(RoughLengthFile) /= '' .or. trim(RoughLengthName) /= '' ) then
if ( present(xy_SurfRoughLength) ) then
call HistoryGet( RoughLengthFile, RoughLengthName, xy_SurfRoughLength )
end if
end if
if ( trim(HeatCapacityFile) /= '' .or. trim(HeatCapacityName) /= '' ) then
if ( present(xy_SurfHeatCapacity) ) then
call HistoryGet( HeatCapacityFile, HeatCapacityName, xy_SurfHeatCapacity )
end if
end if
if ( trim(TempFluxFile) /= '' .or. trim(TempFluxName) /= '' ) then
if ( present(xy_GroundTempFlux) ) then
call HistoryGet( TempFluxFile, TempFluxName, xy_GroundTempFlux )
end if
end if
if ( trim(SurfCondFile) /= '' .or. trim(SurfCondName) /= '' ) then
if ( present(xy_SurfCond) ) then
call HistoryGet( SurfCondFile, SurfCondName, xy_SurfCond )
end if
end if
if ( trim(SurfHeightFile) /= '' .or. trim(SurfHeightName) /= '' ) then
if ( present(xy_SurfHeight) ) then
call HistoryGet( SurfHeightFile, SurfHeightName, xy_SurfHeight )
end if
end if
flag_first = .false.
end if
! 地表面温度を SST で置き換え ( xy_SurfCond <=0 の場所のみ )
! Surface temperature is replaced with SST ( only xy_SurfCond <=0 )
!
if ( present(xy_SurfTemp) ) then
where( xy_SurfCond <= 0 .and. xy_SurfTempSave > 0.0_DP )
xy_SurfTemp = xy_SurfTempSave
end where
end if
end subroutine GroundFileGet
| Variable : | |||
| ground_file_io_inited = .false. : | logical, save, public
|
| Variable : | |||
| ground_file_opened = .false. : | logical, save, public
|
| Variable : | |||
| AlbedoFile : | character(TOKEN), save
|
| Variable : | |||
| AlbedoName : | character(TOKEN), save
|
| Subroutine : |
ground_file_io モジュールの初期化を行います. NAMELIST#ground_file_io_nml の読み込みはこの手続きで行われます.
"ground_file_io" module is initialized. "NAMELIST#ground_file_io_nml" is loaded in this procedure.
This procedure input/output NAMELIST#ground_file_io_nml .
subroutine GroundFileInit
!
! ground_file_io モジュールの初期化を行います.
! NAMELIST#ground_file_io_nml の読み込みはこの手続きで行われます.
!
! "ground_file_io" module is initialized.
! "NAMELIST#ground_file_io_nml" is loaded in this procedure.
!
! モジュール引用 ; USE statements
!
! 時刻管理
! Time control
!
use timeset, only: DelTime ! $ \Delta t $ [s]
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! 種別型パラメタ
! Kind type parameter
!
use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output
! 宣言文 ; Declaration statements
!
implicit none
! 作業変数
! Work variables
!
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
namelist /ground_file_io_nml/ SurfTempFile, SurfTempName, AlbedoFile, AlbedoName, HumidCoeffFile, HumidCoeffName, RoughLengthFile, RoughLengthName, HeatCapacityFile, HeatCapacityName, TempFluxFile, TempFluxName, SurfCondFile, SurfCondName, SurfHeightFile, SurfHeightName
!
! デフォルト値については初期化手続 "ground_file_io#GroundFileInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "ground_file_io#GroundFileInit" for the default values.
!
!!$ & OutputFile, &
!!$ & IntValue, IntUnit
! 実行文 ; Executable statement
!
if ( ground_file_io_inited ) return
call InitCheck
! デフォルト値の設定
! Default values settings
!
SurfTempFile = ''
SurfTempName = ''
AlbedoFile = ''
AlbedoName = ''
HumidCoeffFile = ''
HumidCoeffName = ''
RoughLengthFile = ''
RoughLengthName = ''
HeatCapacityFile = ''
HeatCapacityName = ''
TempFluxFile = ''
TempFluxName = ''
SurfCondFile = ''
SurfCondName = ''
SurfHeightFile = ''
SurfHeightName = ''
!!$ OutputFile = 'sst.nc'
!!$ IntValue = 1.0_DP
!!$ IntUnit = 'day'
! NAMELIST の読み込み
! NAMELIST is input
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = ground_file_io_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
if ( iostat_nml == 0 ) write( STDOUT, nml = ground_file_io_nml )
end if
!!$ ! 出力時間間隔の設定
!!$ ! Configure time interval of output
!!$ !
!!$ call DCDiffTimeCreate( PrevOutputTime, & ! (out)
!!$ & sec = 0.0_DP ) ! (in)
!!$ call DCDiffTimeCreate( IntTime, & ! (out)
!!$ & IntValue, IntUnit ) ! (in)
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, 'Input:: ' )
call MessageNotify( 'M', module_name, ' SurfTempFile = %c', c1 = trim(SurfTempFile) )
call MessageNotify( 'M', module_name, ' SurfTempName = %c', c1 = trim(SurfTempName ) )
call MessageNotify( 'M', module_name, ' AlbedoFile = %c', c1 = trim(AlbedoFile ) )
call MessageNotify( 'M', module_name, ' AlbedoName = %c', c1 = trim(AlbedoName ) )
call MessageNotify( 'M', module_name, ' HumidCoeffFile = %c', c1 = trim(HumidCoeffFile ) )
call MessageNotify( 'M', module_name, ' HumidCoeffName = %c', c1 = trim(HumidCoeffName ) )
call MessageNotify( 'M', module_name, ' RoughLengthFile = %c', c1 = trim(RoughLengthFile ) )
call MessageNotify( 'M', module_name, ' RoughLengthName = %c', c1 = trim(RoughLengthName ) )
call MessageNotify( 'M', module_name, ' HeatCapacityFile = %c', c1 = trim(HeatCapacityFile) )
call MessageNotify( 'M', module_name, ' HeatCapacityName = %c', c1 = trim(HeatCapacityName) )
call MessageNotify( 'M', module_name, ' TempFluxFile = %c', c1 = trim(TempFluxFile ) )
call MessageNotify( 'M', module_name, ' TempFluxName = %c', c1 = trim(TempFluxName ) )
call MessageNotify( 'M', module_name, ' SurfCondFile = %c', c1 = trim(SurfCondFile ) )
call MessageNotify( 'M', module_name, ' SurfCondName = %c', c1 = trim(SurfCondName ) )
call MessageNotify( 'M', module_name, ' SurfHeightFile = %c', c1 = trim(SurfHeightFile ) )
call MessageNotify( 'M', module_name, ' SurfHeightName = %c', c1 = trim(SurfHeightName ) )
!!$ call MessageNotify( 'M', module_name, 'Output:: ' )
!!$ call MessageNotify( 'M', module_name, ' OutputFile = %c', c1 = trim(OutputFile) )
!!$ call MessageNotify( 'M', module_name, ' IntTime = %f [%c]', d = (/ IntValue /), c1 = trim(IntUnit) )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
ground_file_io_inited = .true.
end subroutine GroundFileInit
| Variable : | |||
| HeatCapacityFile : | character(TOKEN), save
|
| Variable : | |||
| HeatCapacityName : | character(TOKEN), save
|
| Variable : | |||
| HumidCoeffFile : | character(TOKEN), save
|
| Variable : | |||
| HumidCoeffName : | character(TOKEN), save
|
| Subroutine : |
依存モジュールの初期化チェック
Check initialization of dependency modules
subroutine InitCheck
!
! 依存モジュールの初期化チェック
!
! Check initialization of dependency modules
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_util_inited
! 出力ファイルの基本情報管理
! Management basic information for output files
!
use fileset, only: fileset_inited
! 格子点設定
! Grid points settings
!
use gridset, only: gridset_inited
! 物理定数設定
! Physical constants settings
!
use constants, only: constants_inited
! 座標データ設定
! Axes data settings
!
use axesset, only: axesset_inited
! 時刻管理
! Time control
!
use timeset, only: timeset_inited
! 実行文 ; Executable statement
!
if ( .not. namelist_util_inited ) call MessageNotify( 'E', module_name, '"namelist_util" module is not initialized.' )
if ( .not. fileset_inited ) call MessageNotify( 'E', module_name, '"fileset" module is not initialized.' )
if ( .not. gridset_inited ) call MessageNotify( 'E', module_name, '"gridset" module is not initialized.' )
if ( .not. constants_inited ) call MessageNotify( 'E', module_name, '"constants" module is not initialized.' )
if ( .not. axesset_inited ) call MessageNotify( 'E', module_name, '"axesset" module is not initialized.' )
if ( .not. timeset_inited ) call MessageNotify( 'E', module_name, '"timeset" module is not initialized.' )
end subroutine InitCheck
| Variable : | |||
| RoughLengthFile : | character(TOKEN), save
|
| Variable : | |||
| RoughLengthName : | character(TOKEN), save
|
| Variable : | |||
| SurfCondFile : | character(TOKEN), save
|
| Variable : | |||
| SurfCondName : | character(TOKEN), save
|
| Variable : | |||
| SurfHeightFile : | character(STRING), save
|
| Variable : | |||
| SurfHeightName : | character(TOKEN), save
|
| Variable : | |||
| SurfTempFile : | character(STRING), save
|
| Variable : | |||
| SurfTempName : | character(TOKEN), save
|
| Variable : | |||
| TempFluxFile : | character(TOKEN), save
|
| Variable : | |||
| TempFluxName : | character(TOKEN), save
|
| Constant : | |||
| module_name = ‘ground_file_io‘ : | character(*), parameter
|
| Constant : | |||
| version = ’$Name: dcpam5-20090126 $’ // ’$Id: ground_file_io.f90,v 1.7 2009-01-21 11:45:30 morikawa Exp $’ : | character(*), parameter
|