| Class | dry_conv_adjust |
| In: |
dryconv_adjust/dry_conv_adjust.f90
|
Note that Japanese and English are described in parallel.
| DryConvAdjust : | 乾燥対流調節 |
| ———— : | ———— |
| DryConvAdjust : | Dry convective adjustment |
| Subroutine : | |||
| xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(inout)
| ||
| xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(in )
| ||
| xyr_Press(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(in )
|
乾燥対流調節スキームにより, 温度を調節.
Adjust temperature by dry convective adjustment
subroutine DryConvAdjust( xyz_Temp, xyz_Press, xyr_Press )
!
! 乾燥対流調節スキームにより, 温度を調節.
!
! Adjust temperature by dry convective adjustment
!
! モジュール引用 ; USE statements
!
! 物理・数学定数設定
! Physical and mathematical constants settings
!
use constants0, only: GasRUniv
! $ R^{*} $ [J K-1 mol-1].
! 普遍気体定数. Universal gas constant
! 物理定数設定
! Physical constants settings
!
use constants, only: Grav, GasRDry, CpDry
! $ C_p $ [J kg-1 K-1].
! 乾燥大気の定圧比熱.
! Specific heat of air at constant pressure
! 時刻管理
! Time control
!
use timeset, only: DelTime, TimeN, TimesetClockStart, TimesetClockStop
! ヒストリデータ出力
! History data output
!
use gtool_historyauto, only: HistoryAutoPut
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(inout):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax)
! $ T $ . 温度. Temperature
real(DP), intent(in ):: xyz_Press (0:imax-1, 1:jmax, 1:kmax)
! $ p $ . 気圧 (整数レベル).
! Air pressure (full level)
real(DP), intent(in ):: xyr_Press (0:imax-1, 1:jmax, 0:kmax)
! $ \hat{p} $ . 気圧 (半整数レベル).
! Air pressure (half level)
! 作業変数
! Work variables
!
real(DP):: xyz_DTempDt(0:imax-1, 1:jmax, 1:kmax)
! 温度変化率.
! Temperature tendency
real(DP):: xyz_TempB (0:imax-1, 1:jmax, 1:kmax)
! 調節前の温度.
! Temperature before adjustment
logical:: xy_Adjust (0:imax-1, 1:jmax)
! 今回調節されたか否か?.
! Whether it was adjusted this time or not?
logical:: xy_AdjustB (0:imax-1, 1:jmax)
! 前回調節されたか否か?.
! Whether it was adjusted last time or not?
real(DP):: xyz_DelPress(0:imax-1, 1:jmax, 1:kmax)
! $ \Delta p $
!
real(DP):: xyr_ConvAdjustFactor(0:imax-1, 1:jmax, 0:kmax)
! $ \frac{1}{2} \frac{ R }{Cp}
! \frac{ p_{k} - p_{k+1} }{ p_{k+1/2} } $
real(DP):: TempEquivToExcEne
! Temperature equivalent to the excess dry static energy
! (Dry static energy difference devided by specific heat)
real(DP):: DelTempUppLev
! k+1 番目の層における調節による温度の変化量.
! Temperature variation by adjustment at k+1 level
real(DP):: DelTempLowLev
! k 番目の層における調節による温度の変化量.
! Temperature variation by adjustment at k level
logical:: Adjust
! 今回全領域において一度でも調節されたか否か?.
! Whether it was adjusted even once in global
! this time or not?
real(DP):: TempLowLevBefAdj ! Variables for check routine
real(DP):: TempUppLevBefAdj
integer:: i ! 経度方向に回る DO ループ用作業変数
! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
integer:: k ! 鉛直方向に回る DO ループ用作業変数
! Work variables for DO loop in vertical direction
integer:: itr ! イテレーション方向に回る DO ループ用作業変数
! Work variables for DO loop in iteration direction
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. dry_conv_adjust_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
if ( .not. FlagUse ) return
! 計算時間計測開始
! Start measurement of computation time
!
call TimesetClockStart( module_name )
! 調節前 "Temp" の保存
! Store "Temp" before adjustment
!
xyz_TempB = xyz_Temp
! Calculate some values used for dry convective adjustment
!
do k = 1, kmax
xyz_DelPress(:,:,k) = xyr_Press(:,:,k-1) - xyr_Press(:,:,k)
end do
! \frac{1}{2} \frac{ R }{Cp} \frac{ p_{k} - p_{k+1} }{ p_{k+1/2} }
!
! The value at k = 0 is not used.
k = 0
xyr_ConvAdjustFactor(:,:,k) = 0.0d0
!
do k = 1, kmax-1
xyr_ConvAdjustFactor(:,:,k) = GasRDry / CpDry * ( xyz_Press(:,:,k) - xyz_Press(:,:,k+1) ) / xyr_Press(:,:,k) / 2.0_DP
end do
! The value at k = kmax is not used.
k = kmax
xyr_ConvAdjustFactor(:,:,k) = 0.0d0
! 調節
! Adjustment
!
xy_AdjustB = .true.
! 繰り返し
! Iteration
!
do itr = 1, ItrtMax
xy_Adjust = .false.
do k = 1, kmax-1
do j = 1, jmax
do i = 0, imax-1
if ( xy_AdjustB(i,j) ) then
! Temperature equivalent to the excess dry static energy
! (Dry static energy difference devided by specific heat)
!
TempEquivToExcEne = xyz_Temp(i,j,k) - xyz_Temp(i,j,k+1) - xyr_ConvAdjustFactor(i,j,k) * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) )
! Check vertical gradient of dry static energy
!
if ( TempEquivToExcEne > AdjustCriterion(itr) ) then
DelTempUppLev = xyz_DelPress(i,j,k) * TempEquivToExcEne / ( xyr_ConvAdjustFactor(i,j,k) * ( xyz_DelPress(i,j,k ) - xyz_DelPress(i,j,k+1) ) + xyz_DelPress(i,j,k) + xyz_DelPress(i,j,k+1) )
DelTempLowLev = - xyz_DelPress(i,j,k+1) * DelTempUppLev / xyz_DelPress(i,j,k)
!=========
! check routine
!---------
!!$ TempLowLevBefAdj = xyz_Temp(i,j,k )
!!$ TempUppLevBefAdj = xyz_Temp(i,j,k+1)
!=========
! 温度の調節
! Adjust temperature
!
xyz_Temp(i,j,k ) = xyz_Temp(i,j,k ) + DelTempLowLev
xyz_Temp(i,j,k+1) = xyz_Temp(i,j,k+1) + DelTempUppLev
!=========
! check routine
!---------
!!$ write( 6, * ) '====='
!!$ write( 6, * ) 'Energy difference before and after adjustment and each energy'
!!$ write( 6, * ) &
!!$ & ( CpDry * TempLowLevBefAdj ) &
!!$ & * xyz_DelPress(i,j,k ) / Grav &
!!$ & + ( CpDry * TempUppLevBefAdj ) &
!!$ & * xyz_DelPress(i,j,k+1) / Grav &
!!$ & - ( CpDry * xyz_Temp(i,j,k ) ) &
!!$ & * xyz_DelPress(i,j,k ) / Grav &
!!$ & - ( CpDry * xyz_Temp(i,j,k+1) ) &
!!$ & * xyz_DelPress(i,j,k+1) / Grav, &
!!$ & ( CpDry * TempLowLevBefAdj ) &
!!$ & * xyz_DelPress(i,j,k ) / Grav, &
!!$ & ( CpDry * TempUppLevBefAdj ) &
!!$ & * xyz_DelPress(i,j,k+1) / Grav, &
!!$ & ( CpDry * xyz_Temp(i,j,k ) ) &
!!$ & * xyz_DelPress(i,j,k ) / Grav, &
!!$ & ( CpDry * xyz_Temp(i,j,k+1) ) &
!!$ & * xyz_DelPress(i,j,k+1) / Grav
!!$ write( 6, * ) 'Difference of dry static energy after adjustment'
!!$ write( 6, * ) &
!!$ & ( CpDry * xyz_Temp(i,j,k ) ) &
!!$ & - ( CpDry * xyz_Temp(i,j,k+1) ) &
!!$ & - CpDry * xyr_ConvAdjustFactor(i,j,k) &
!!$ & * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) ), &
!!$ & ( CpDry * xyz_Temp(i,j,k ) ), &
!!$ & ( CpDry * xyz_Temp(i,j,k+1) ), &
!!$ & - CpDry * xyr_ConvAdjustFactor(i,j,k) &
!!$ & * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) )
!=========
! 調節したか否か?
! Whether it was adjusted or not?
!
xy_Adjust(i,j) = .true.
end if
end if
end do
end do
end do
Adjust = .false.
do i = 0, imax-1
do j = 1, jmax
xy_AdjustB(i,j) = xy_Adjust(i,j)
Adjust = Adjust .or. xy_Adjust(i,j)
end do
end do
if ( .not. Adjust ) exit
end do
! 温度変化率
! Calculate temperature tendency
!
xyz_DTempDt = ( xyz_Temp - xyz_TempB ) / ( 2.0_DP * DelTime )
! ヒストリデータ出力
! History data output
!
call HistoryAutoPut( TimeN, 'DTempDtDryConv', xyz_DTempDt )
! 計算時間計測一時停止
! Pause measurement of computation time
!
call TimesetClockStop( module_name )
end subroutine DryConvAdjust
| Subroutine : |
dry_conv_adjust モジュールの初期化を行います. NAMELIST#dry_conv_adjust_nml の読み込みはこの手続きで行われます.
"dyr_conv_adjust" module is initialized. "NAMELIST#dry_conv_adjust_nml" is loaded in this procedure.
This procedure input/output NAMELIST#dry_conv_adjust_nml .
subroutine DryConvAdjustInit
!
! dry_conv_adjust モジュールの初期化を行います.
! NAMELIST#dry_conv_adjust_nml の読み込みはこの手続きで行われます.
!
! "dyr_conv_adjust" module is initialized.
! "NAMELIST#dry_conv_adjust_nml" is loaded in this procedure.
!
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! 種別型パラメタ
! Kind type parameter
!
use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output
! 文字列操作
! Character handling
!
use dc_string, only: StoA
! ヒストリデータ出力
! History data output
!
use gtool_historyauto, only: HistoryAutoAddVariable
! 宣言文 ; Declaration statements
!
implicit none
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
namelist /dry_conv_adjust_nml/ CrtlRH, ItrtMax, AdjustCriterion, FlagUse
! デフォルト値については初期化手続 "dry_conv_adjust#DryConvAdjustInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "dry_conv_adjust#DryConvAdjustInit" for the default values.
!
! 実行文 ; Executable statement
!
if ( dry_conv_adjust_inited ) return
! デフォルト値の設定
! Default values settings
!
! default values used in AGCM5
!!$ CrtlRH = 0.990_DP
!!$ ItrtMax = 10
!!$ AdjustCriterion(1:ItrtMax) = &
!!$ & (/ 0.01_DP, 0.02_DP, 0.02_DP, 0.05_DP, 0.05_DP, &
!!$ & 0.10_DP, 0.10_DP, 0.20_DP, 0.20_DP, 0.40_DP /)
!
CrtlRH = 1.0d0
ItrtMax = 10
AdjustCriterion(1:ItrtMax) = 0.0d0
!
FlagUse = .true.
! NAMELIST の読み込み
! NAMELIST is input
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = dry_conv_adjust_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$ if ( iostat_nml == 0 ) write( STDOUT, nml = cumulus_adjust_nml )
end if
! イテレーション回数, 不安定の許容誤差のチェック
! Check number of iteration, admissible error of unstability
!
call NmlutilAryValid( module_name, AdjustCriterion, 'AdjustCriterion', ItrtMax, 'ItrtMax' ) ! (in)
! ヒストリデータ出力のためのへの変数登録
! Register of variables for history data output
!
call HistoryAutoAddVariable( 'DTempDtDryConv', (/ 'lon ', 'lat ', 'sig ', 'time' /), 'dry convective adjustment heating', 'K s-1' )
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, ' FlagUse = %b', l = (/ FlagUse /) )
call MessageNotify( 'M', module_name, ' CrtlRH = %f', d = (/ CrtlRH /) )
call MessageNotify( 'M', module_name, ' ItrtMax = %d', i = (/ ItrtMax /) )
call MessageNotify( 'M', module_name, ' AdjustCriterion = (/ %*r /)', r = real( AdjustCriterion(1:ItrtMax) ), n = (/ ItrtMax /) )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
dry_conv_adjust_inited = .true.
end subroutine DryConvAdjustInit
| Variable : | |||
| AdjustCriterion(1:MaxNmlArySize) : | real(DP), save
|
| Variable : | |||
| dry_conv_adjust_inited = .false. : | logical, save
|
| Constant : | |||
| module_name = ‘dry_conv_adjust‘ : | character(*), parameter
|
| Constant : | |||
| version = ’$Name: dcpam5-20120224 $’ // ’$Id: dry_conv_adjust.f90,v 1.5 2011-06-25 16:25:34 yot Exp $’ : | character(*), parameter
|