subroutine MoistConvAdjust( xyz_Temp, xyz_QVap, xyz_DTempDt, xyz_DQVapDt, xyz_Press, xyr_Press, xyz_DQH2OLiqDt )
    !
    ! 湿潤対流調節スキームにより, 温度と比湿を調節. 
    !
    ! Adjust temperature and specific humidity by moist convective adjustment
    !

    ! モジュール引用 ; USE statements
    !

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: Grav, GasRDry, CpDry, LatentHeat
                              ! $ L $ [J kg-1] . 
                              ! 凝結の潜熱. 
                              ! Latent heat of condensation

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimeN, TimesetClockStart, TimesetClockStop

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoPut

    ! 飽和比湿の算出
    ! Evaluate saturation specific humidity
    !
    use saturate, only: xyz_CalcQVapSat, xy_CalcDQVapSatDTemp


    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(inout):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ .     温度. Temperature
    real(DP), intent(inout):: xyz_QVap (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q $ .     比湿. Specific humidity
!!$    real(DP), intent(inout):: xy_Rain (0:imax-1, 1:jmax)
!!$                              ! 降水量. 
!!$                              ! Precipitation
    real(DP), intent(inout):: xyz_DTempDt (0:imax-1, 1:jmax, 1:kmax)
                              ! 温度変化率. 
                              ! Temperature tendency
    real(DP), intent(inout):: xyz_DQVapDt (0:imax-1, 1:jmax, 1:kmax)
                              ! 比湿変化率. 
                              ! Specific humidity tendency

    real(DP), intent(in):: xyz_Press (0:imax-1, 1:jmax, 1:kmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(in):: xyr_Press (0:imax-1, 1:jmax, 0:kmax)
                              ! $ \hat{p} $ . 気圧 (半整数レベル). 
                              ! Air pressure (half level)
    real(DP), intent(out):: xyz_DQH2OLiqDt(0:imax-1, 1:jmax, 1:kmax)

    ! 作業変数
    ! Work variables
    !
    real(DP):: xy_RainCumulus (0:imax-1, 1:jmax)
                              ! 降水量. 
                              ! Precipitation
    real(DP):: xyz_DTempDtCumulus (0:imax-1, 1:jmax, 1:kmax)
                              ! 温度変化率. 
                              ! Temperature tendency
    real(DP):: xyz_DQVapDtCumulus (0:imax-1, 1:jmax, 1:kmax)
                              ! 比湿変化率. 
                              ! Specific humidity tendency

    real(DP):: xyz_QVapB (0:imax-1, 1:jmax, 1:kmax)
                              ! 調節前の比湿. 
                              ! Specific humidity before adjustment
    real(DP):: xyz_TempB (0:imax-1, 1:jmax, 1:kmax)
                              ! 調節前の温度. 
                              ! Temperature before adjustment
    logical:: xy_Adjust (0:imax-1, 1:jmax)
                              ! 今回調節されたか否か?. 
                              ! Whether it was adjusted this time or not?
    logical:: xy_AdjustB (0:imax-1, 1:jmax)
                              ! 前回調節されたか否か?. 
                              ! Whether it was adjusted last time or not?
    real(DP):: xyz_DelPress(0:imax-1, 1:jmax, 1:kmax)
                              ! $ \Delta p $
                              !
    real(DP):: xyz_QVapSat (0:imax-1, 1:jmax, 1:kmax)
                              ! 飽和比湿. 
                              ! Saturation specific humidity. 
    real(DP):: xyr_ConvAdjustFactor(0:imax-1, 1:jmax, 0:kmax)
                              ! $ \frac{1}{2} \frac{ R }{Cp} 
                              !   \frac{ p_{k} - p_{k+1} }{ p_{k+1/2} } $

    real(DP):: TempEquivToExcEne
                              ! Temperature equivalent to the excess moist static energy
                              ! (Moist static energy difference devided by specific heat)

    real(DP):: DelQ
    real(DP):: DelTempUppLev
                              ! k+1 番目の層における調節による温度の変化量. 
                              ! Temperature variation by adjustment at k+1 level
    real(DP):: DelTempLowLev
                              ! k 番目の層における調節による温度の変化量. 
                              ! Temperature variation by adjustment at k level
    real(DP):: DQVapSatDTempUppLev
                              ! $ \DD{q^{*}} (k+1)}{T} $
    real(DP):: DQVapSatDTempLowLev
                              ! $ \DD{q^{*}} (k)}{T} $
    real(DP):: GamUppLev
                              ! $ \gamma_{k+1} = \frac{L}{C_p} \DP{q^{*}}{T}_{k+1} $
    real(DP):: GamLowLev
                              ! $ \gamma_{k}   = \frac{L}{C_p} \DP{q^{*}}{T}_{k} $
    logical:: Adjust
                              ! 今回全領域において一度でも調節されたか否か?. 
                              ! Whether it was adjusted even once in global 
                              ! this time or not?

    real(DP):: TempLowLevBefAdj ! Variables for check routine
    real(DP):: TempUppLevBefAdj
    real(DP):: QVapLowLevBefAdj
    real(DP):: QVapUppLevBefAdj

    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude
    integer:: k               ! 鉛直方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in vertical direction
    integer:: itr             ! イテレーション方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in iteration direction

    real(DP):: xy_DQVapSatDTempUppLev(0:imax-1, 1:jmax)
    real(DP):: xy_DQVapSatDTempLowLev(0:imax-1, 1:jmax)

    real(DP):: xyz_RainCumulus (0:imax-1, 1:jmax, 1:kmax)

    real(DP) :: xy_NegDDelLWDt   (0:imax-1, 1:jmax)
    real(DP) :: xyz_DDelLWDtCCPLV(0:imax-1, 1:jmax, 1:kmax)


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. moist_conv_adjust_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if

!!$    if ( .not. FlagUse ) return


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    ! 調節前 "QVap", "Temp" の保存
    ! Store "QVap", "Temp" before adjustment
    !
    xyz_QVapB = xyz_QVap
    xyz_TempB = xyz_Temp

    ! 飽和比湿計算
    ! Calculate saturation specific humidity
    !
    xyz_QVapSat = xyz_CalcQVapSat( xyz_Temp, xyz_Press )

    ! Calculate some values used for moist convective adjustment
    !

    do k = 1, kmax
      xyz_DelPress(:,:,k) = xyr_Press(:,:,k-1) - xyr_Press(:,:,k)
    end do

    ! \frac{1}{2} \frac{ R }{Cp} \frac{ p_{k} - p_{k+1} }{ p_{k+1/2} }
    !
    !   The value at k = 0 is not used.
    k = 0
    xyr_ConvAdjustFactor(:,:,k) = 0.0d0
    !
    do k = 1, kmax-1
      xyr_ConvAdjustFactor(:,:,k) = GasRDry / CpDry * ( xyz_Press(:,:,k) - xyz_Press(:,:,k+1) ) / xyr_Press(:,:,k) / 2.0_DP
    end do
    !   The value at k = kmax is not used.
    k = kmax
    xyr_ConvAdjustFactor(:,:,k) = 0.0d0


    ! 調節
    ! Adjustment
    !
    xy_AdjustB = .true.

    ! 繰り返し
    ! Iteration
    !
    do itr = 1, ItrtMax
      xy_Adjust = .false.

      do k = 1, kmax-1

        xy_DQVapSatDTempUppLev = xy_CalcDQVapSatDTemp( xyz_Temp(:,:,k+1), xyz_QVapSat(:,:,k+1) )
        xy_DQVapSatDTempLowLev = xy_CalcDQVapSatDTemp( xyz_Temp(:,:,k  ), xyz_QVapSat(:,:,k  ) )

        do j = 1, jmax
          do i = 0, imax-1
            if ( xy_AdjustB(i,j) ) then

              ! Temperature equivalent to the excess moist static energy
              ! (Moist static energy difference devided by specific heat)
              !
              TempEquivToExcEne = xyz_Temp(i,j,k) - xyz_Temp(i,j,k+1) + LatentHeat / CpDry * ( xyz_QVapSat(i,j,k) - xyz_QVapSat(i,j,k+1) ) - xyr_ConvAdjustFactor(i,j,k) * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) )

              ! Check vertical gradient of moist static energy
              !
              if ( TempEquivToExcEne > AdjustCriterion(itr) ) then

                ! Check relative humidity
                !
                if ( ( xyz_QVap(i,j,k+1) / xyz_QVapSat(i,j,k+1) >= CrtlRH ) .and. ( xyz_QVap(i,j,k  ) / xyz_QVapSat(i,j,k  ) >= CrtlRH ) ) then

                  DelQ = xyz_DelPress(i,j,k  ) * ( xyz_QVap(i,j,k  ) - xyz_QVapSat(i,j,k  ) ) + xyz_DelPress(i,j,k+1) * ( xyz_QVap(i,j,k+1) - xyz_QVapSat(i,j,k+1) )

                  DQVapSatDTempUppLev = xy_DQVapSatDTempUppLev(i,j)
                  DQVapSatDTempLowLev = xy_DQVapSatDTempLowLev(i,j)

                  GamUppLev = LatentHeat / CpDry * DQVapSatDTempUppLev
                  GamLowLev = LatentHeat / CpDry * DQVapSatDTempLowLev

                  DelTempUppLev = ( xyz_DelPress(i,j,k) * ( 1.0d0 + GamLowLev ) * TempEquivToExcEne + ( 1.0d0 + GamLowLev - xyr_ConvAdjustFactor(i,j,k) ) * LatentHeat / CpDry * DelQ ) / ( xyr_ConvAdjustFactor(i,j,k) * ( xyz_DelPress(i,j,k  ) * ( 1.0d0 + GamLowLev ) - xyz_DelPress(i,j,k+1) * ( 1.0d0 + GamUppLev ) ) + ( 1.0d0 + GamLowLev ) * ( 1.0d0 + GamUppLev ) * ( xyz_DelPress(i,j,k) + xyz_DelPress(i,j,k+1) ) )

                  DelTempLowLev = ( LatentHeat / CpDry * DelQ - xyz_DelPress(i,j,k+1) * ( 1.0d0 + GamUppLev ) * DelTempUppLev ) / ( ( 1.0d0 + GamLowLev ) * xyz_DelPress(i,j,k) )


                  !=========
                  ! check routine
                  !---------
!!$                  TempLowLevBefAdj = xyz_Temp(i,j,k  )
!!$                  TempUppLevBefAdj = xyz_Temp(i,j,k+1)
!!$                  QVapLowLevBefAdj = xyz_QVap(i,j,k  )
!!$                  QVapUppLevBefAdj = xyz_QVap(i,j,k+1)
                  !=========


                  ! 温度の調節
                  ! Adjust temperature
                  !
                  xyz_Temp(i,j,k  ) = xyz_Temp(i,j,k  ) + DelTempLowLev
                  xyz_Temp(i,j,k+1) = xyz_Temp(i,j,k+1) + DelTempUppLev

                  ! 比湿の調節
                  ! Adjust specific humidity
                  !
                  xyz_QVap(i,j,k  ) = xyz_QVapSat(i,j,k  ) + DQVapSatDTempLowLev * DelTempLowLev
                  xyz_QVap(i,j,k+1) = xyz_QVapSat(i,j,k+1) + DQVapSatDTempUppLev * DelTempUppLev


                  !=========
                  ! check routine
                  !---------
!!$                  write( 6, * ) '====='
!!$                  write( 6, * ) xyz_Temp(i,j,k), xyz_Temp(i,j,k+1), xyz_QVap(i,j,k), xyz_QVap(i,j,k+1)
!!$                  write( 6, * ) DelTempLowLev, DelTempUppLev
!!$                  write( 6, * ) 'Energy difference before and after adjustment and each energy'
!!$                  write( 6, * ) &
!!$                    &   ( CpDry * TempLowLevBefAdj  + LatentHeat * QVapLowLevBefAdj )  &
!!$                    &     * xyz_DelPress(i,j,k  ) / Grav                               &
!!$                    & + ( CpDry * TempUppLevBefAdj  + LatentHeat * QVapUppLevBefAdj )  &
!!$                    &     * xyz_DelPress(i,j,k+1) / Grav                               &
!!$                    & - ( CpDry * xyz_Temp(i,j,k  ) + LatentHeat * xyz_QVap(i,j,k  ) ) &
!!$                    &     * xyz_DelPress(i,j,k  ) / Grav                               &
!!$                    & - ( CpDry * xyz_Temp(i,j,k+1) + LatentHeat * xyz_QVap(i,j,k+1) ) &
!!$                    &     * xyz_DelPress(i,j,k+1) / Grav,                              &
!!$                    &   ( CpDry * TempLowLevBefAdj  + LatentHeat * QVapLowLevBefAdj )  &
!!$                    &     * xyz_DelPress(i,j,k  ) / Grav,                              &
!!$                    &   ( CpDry * TempUppLevBefAdj  + LatentHeat * QVapUppLevBefAdj )  &
!!$                    &     * xyz_DelPress(i,j,k+1) / Grav,                              &
!!$                    &   ( CpDry * xyz_Temp(i,j,k  ) + LatentHeat * xyz_QVap(i,j,k  ) ) &
!!$                    &     * xyz_DelPress(i,j,k  ) / Grav,                              &
!!$                    &   ( CpDry * xyz_Temp(i,j,k+1) + LatentHeat * xyz_QVap(i,j,k+1) ) &
!!$                    &     * xyz_DelPress(i,j,k+1) / Grav
!!$                  write( 6, * ) 'Difference of moist static energy after adjustment'
!!$                  write( 6, * ) &
!!$                    &   ( CpDry * xyz_Temp(i,j,k  ) + LatentHeat * xyz_QVap(i,j,k  ) )  &
!!$                    & - ( CpDry * xyz_Temp(i,j,k+1) + LatentHeat * xyz_QVap(i,j,k+1) )  &
!!$                    & - CpDry * xyr_ConvAdjustFactor(i,j,k)                             &
!!$                    &   * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) ),                      &
!!$                    &   ( CpDry * xyz_Temp(i,j,k  ) + LatentHeat * xyz_QVap(i,j,k  ) ), &
!!$                    &   ( CpDry * xyz_Temp(i,j,k+1) + LatentHeat * xyz_QVap(i,j,k+1) ), &
!!$                    & - CpDry * xyr_ConvAdjustFactor(i,j,k)                             &
!!$                    &   * ( xyz_Temp(i,j,k) + xyz_Temp(i,j,k+1) )
!!$                  write( 6, * ) 'Difference of water vapor amount before and after adjustment'
!!$                  write( 6, * ) &
!!$                    & - LatentHeat * ( xyz_QVap(i,j,k  ) - QVapLowLevBefAdj ) &
!!$                    & * xyz_DelPress(i,j,k  ) / Grav,                       &
!!$                    & - LatentHeat * ( xyz_QVap(i,j,k+1) - QVapUppLevBefAdj ) &
!!$                    & * xyz_DelPress(i,j,k+1) / Grav
                  !=========


                  xyz_QVapSat(i,j,k  ) = xyz_QVap(i,j,k  )
                  xyz_QVapSat(i,j,k+1) = xyz_QVap(i,j,k+1)

                  ! 調節したか否か?
                  ! Whether it was adjusted or not?
                  !
                  xy_Adjust(i,j) = .true.
                end if

              end if

            end if
          end do
        end do
      end do

      Adjust = .false.
      do i = 0, imax-1
        do j = 1, jmax
          xy_AdjustB(i,j) = xy_Adjust(i,j)
          Adjust          = Adjust .or. xy_Adjust(i,j)
        end do
      end do

      if ( .not. Adjust ) exit

    end do

    ! 比湿変化率, 温度変化率, 降水量の算出
    ! Calculate specific humidity tendency, temperature tendency, precipitation
    !
    xyz_DQVapDtCumulus = ( xyz_QVap - xyz_QVapB ) / ( 2.0_DP * DelTime )

    xyz_DTempDtCumulus = ( xyz_Temp - xyz_TempB ) / ( 2.0_DP * DelTime )



    xyz_DTempDt = xyz_DTempDt + xyz_DTempDtCumulus
    xyz_DQVapDt = xyz_DQVapDt + xyz_DQVapDtCumulus



    ! OLD CODE TO BE DELETED
    !
!!$    xy_RainCumulus = 0.
!!$    do k = 1, kmax
!!$      xy_RainCumulus = xy_RainCumulus &
!!$        & + ( xyz_QVapB(:,:,k) - xyz_QVap(:,:,k) ) &
!!$        &       * xyz_DelPress(:,:,k) / Grav / ( 2.0_DP * DelTime )
!!$    end do
!!$
!!$    xy_RainCumulus = 0.0d0
!!$    do k = kmax, 1, -1
!!$      xy_RainCumulus = xy_RainCumulus                &
!!$        & + xyz_DelPress(:,:,k) / Grav               &
!!$        &   * ( xyz_QVapB(:,:,k) - xyz_QVap(:,:,k) )
!!$    end do
!!$    xy_RainCumulus = xy_RainCumulus / ( 2.0_DP * DelTime )
!!$
!!$    xyz_RainCumulus = ( xyz_QVapB - xyz_QVap ) &
!!$        & * xyz_DelPress / Grav / ( 2.0_DP * DelTime )
!!$    xy_RainCumulus = 0.0d0
!!$    do k = kmax, 1, -1
!!$      xy_RainCumulus = xy_RainCumulus + xyz_RainCumulus(:,:,k)
!!$    end do

!!$    j = jmax/2+1
!!$    do i = 0, imax-1
!!$      if ( xy_RainCumulus(i,j) /= 0.0d0 ) then
!!$        write( 6, * ) xy_RainCumulus(i,j)
!!$      end if
!!$    end do


    xyz_DQH2OLiqDt = ( xyz_QVapB - xyz_QVap ) / ( 2.0_DP * DelTime )

!!$    xyz_RainCumulus = xyz_DQH2OLiqDt * xyz_DelPress / Grav
!!$    xy_RainCumulus = 0.0d0
!!$    do k = kmax, 1, -1
!!$      xy_RainCumulus = xy_RainCumulus + xyz_RainCumulus(:,:,k)
!!$    end do


!!$    j = jmax/2+1
!!$    do i = 0, imax-1
!!$      if ( xy_RainCumulus(i,j) /= 0.0d0 ) then
!!$        write( 6, * ) xy_RainCumulus(i,j)
!!$      end if
!!$    end do
!!$    write( 6, * ) '---'


!!$    xy_Rain     = xy_Rain     + xy_RainCumulus


    ! calculation for output (tentative)
    xyz_RainCumulus = xyz_DQH2OLiqDt * xyz_DelPress / Grav
    xy_RainCumulus = 0.0d0
    do k = kmax, 1, -1
      xy_RainCumulus = xy_RainCumulus + xyz_RainCumulus(:,:,k)
    end do


    ! ヒストリデータ出力
    ! History data output
    !
    call HistoryAutoPut( TimeN, 'RainCumulus',    xy_RainCumulus * LatentHeat )
    call HistoryAutoPut( TimeN, 'DTempDtCumulus', xyz_DTempDtCumulus )
    call HistoryAutoPut( TimeN, 'DQVapDtCumulus', xyz_DQVapDtCumulus )



!!$    if ( present( xyz_DQH2OLiqDt ) ) then
!!$
!!$      xyz_DDelLWDtCCPLV = &
!!$        & + ( xyz_QVapB - xyz_QVap ) &
!!$        &       * xyz_DelPress / Grav / ( 2.0d0 * DelTime )
!!$
!!$      ! Negative cloud production rate is filled with values in lower layers.
!!$      !
!!$      xy_NegDDelLWDt = 0.0d0
!!$      do k = kmax, 1, -1
!!$        do j = 1, jmax
!!$          do i = 0, imax-1
!!$            xyz_DDelLWDtCCPLV(i,j,k) = xyz_DDelLWDtCCPLV(i,j,k) + xy_NegDDelLWDt(i,j)
!!$            if ( xyz_DDelLWDtCCPLV(i,j,k) < 0.0d0 ) then
!!$              xy_NegDDelLWDt(i,j) = xyz_DDelLWDtCCPLV(i,j,k) 
!!$              xyz_DDelLWDtCCPLV(i,j,k) = 0.0d0
!!$            end if
!!$          end do
!!$        end do
!!$      end do
!!$
!!$      xyz_DQH2OLiqDt = xyz_DDelLWDtCCPLV / ( xyz_DelPress / Grav )
!!$
!!$    end if


    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )

  end subroutine MoistConvAdjust

  subroutine MoistConvAdjustInit
    !
    ! moist_conv_adjust モジュールの初期化を行います. 
    ! NAMELIST#moist_conv_adjust_nml の読み込みはこの手続きで行われます. 
    !
    ! "moist_conv_adjust" module is initialized. 
    ! "NAMELIST#moist_conv_adjust_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: StoA

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /moist_conv_adjust_nml/ CrtlRH, ItrtMax, AdjustCriterion !, FlagUse

          ! デフォルト値については初期化手続 "moist_conv_adjust#CumAdjInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "moist_conv_adjust#MoistConvAdjustInit" for the default values. 
          !

    ! 実行文 ; Executable statement
    !

    if ( moist_conv_adjust_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !
    ! default values used in AGCM5
!!$    CrtlRH  = 0.990_DP
!!$    ItrtMax = 10
!!$    AdjustCriterion(1:ItrtMax) = &
!!$      & (/ 0.01_DP, 0.02_DP, 0.02_DP, 0.05_DP, 0.05_DP, &
!!$      &    0.10_DP, 0.10_DP, 0.20_DP, 0.20_DP, 0.40_DP  /)
    !
    CrtlRH  = 1.0d0
    ItrtMax = 10
    AdjustCriterion(1:ItrtMax) = 0.0d0
    !
!!$    FlagUse = .true.

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = moist_conv_adjust_nml, iostat = iostat_nml )           ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$      if ( iostat_nml == 0 ) write( STDOUT, nml = cumulus_adjust_nml )
    end if

    ! イテレーション回数, 不安定の許容誤差のチェック
    ! Check number of iteration, admissible error of unstability
    !
    call NmlutilAryValid( module_name, AdjustCriterion, 'AdjustCriterion', ItrtMax,    'ItrtMax' )          ! (in)


    ! ヒストリデータ出力のためのへの変数登録
    ! Register of variables for history data output
    !
    call HistoryAutoAddVariable( 'RainCumulus', (/ 'lon ', 'lat ', 'time' /), 'precipitation by cumulus scheme', 'W m-2' )
    call HistoryAutoAddVariable( 'DTempDtCumulus', (/ 'lon ', 'lat ', 'sig ', 'time' /), 'cumulus condensation heating', 'K s-1' )
    call HistoryAutoAddVariable( 'DQVapDtCumulus', (/ 'lon ', 'lat ', 'sig ', 'time' /), 'cumulus condensation moistening', 'kg kg-1 s-1' )

    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$    call MessageNotify( 'M', module_name, '  FlagUse              = %b', l = (/ FlagUse /) )
    call MessageNotify( 'M', module_name, '  CrtlRH               = %f', d = (/ CrtlRH /) )
    call MessageNotify( 'M', module_name, '  ItrtMax              = %d', i = (/ ItrtMax /) )
    call MessageNotify( 'M', module_name, '  AdjustCriterion      = (/ %*r /)', r = real( AdjustCriterion(1:ItrtMax) ), n = (/ ItrtMax /) )
    call MessageNotify( 'M', module_name, '' )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    moist_conv_adjust_inited = .true.

  end subroutine MoistConvAdjustInit