Class read_time_series
In: io/read_time_series.f90

時系列データの読み込み

Reading time series

Note that Japanese and English are described in parallel.

海表面温度, O3 量などの時系列データを NetCDF ファイルから読み込む.

Reading time series data, such as sea surface temperature, O3, and so on, from NetCDF file.

Procedures List

!$ ! GroundFileGet :地表面データファイルの入力

!$ !—

!$ ! GroundFileOpen :地表面データファイルのオープン
!$ ! GroundFileOutput :地表面データファイルへのデータ出力
!$ ! GroundFileClose :地表面データファイルのクローズ

++

———— :————
!$ ! GroundFileGet :Input ground data file

!$ !—

!$ ! GroundFileOpen :Open ground data file
!$ ! GroundFileOutput :Data output to ground data file
!$ ! GroundFileClose :Close ground data file

++

NAMELIST

!$ ! NAMELIST#ground_file_io_nml

Methods

Included Modules

dc_types dc_message gridset gtool_history dc_string dc_calendar timeset netcdf_wrapper dc_iounit namelist_util

Public Instance methods

Subroutine :

This procedure input/output NAMELIST#read_time_series_nml .

[Source]

  subroutine ReadTimeSeriesInit

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! 時刻管理
    ! Time control
    !
    use timeset, only: InitialDate

    ! 宣言文 ; Declaration statements
    !

    logical :: flag_mpi_init

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /read_time_series_nml/ FlagYearCyclic
          !
          ! デフォルト値については初期化手続 "read_time_series#ReadTimeSeriesInit"
          ! のソースコードを参照のこと.
          !
          ! Refer to source codes in the initialization procedure
          ! "read_time_series#ReadTimeSeriesInit" for the default values.
          !

    if ( read_time_series_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !

    FlagYearCyclic = .true.

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = read_time_series_nml, iostat = iostat_nml )             ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    ! Initialzation
    !
    NumMaxStruct = 0


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, 'FlagYearCyclic = %b', l = (/ FlagYearCyclic /) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    read_time_series_inited = .true.


  end subroutine ReadTimeSeriesInit
SetValuesFromTimeSeriesWrapper( Keyword, FileName, VarName, Var )
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
Var :real(DP) , intent(inout)
: 地表面温度. Surface temperature

Alias for SetValFromTimeSeriesWrapper0D

SetValuesFromTimeSeriesWrapper( Keyword, FileName, VarName, xy_Var )
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xy_Var(0:imax-1, 1:jmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature

Alias for SetValFromTimeSeriesWrapper2D

SetValuesFromTimeSeriesWrapper( Keyword, FileName, VarName, xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(in )
: 地表面温度. Surface temperature
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
FlagLogVLev :logical , intent(in )
FlagLog :logical , intent(in )
FlagPositiveDef :logical , intent(in )

Alias for SetValFromTimeSeriesWrapper3D

Private Instance methods

FlagYearCyclic
Variable :
FlagYearCyclic = .true. :logical, save
Subroutine :
FileName :character(*), intent(in )
DateString :character(*), intent(in )
Yr :integer , intent(out)
Mon :integer , intent(out)
Day :integer , intent(out)
Hr :integer , intent(out)
Min :integer , intent(out)
Sec :real(DP) , intent(out)

[Source]

  subroutine InterpretTimeUnitString( FileName, DateString, Yr, Mon, Day, Hr, Min, Sec )

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in ) :: FileName
    character(*), intent(in ) :: DateString
    integer     , intent(out) :: Yr
    integer     , intent(out) :: Mon
    integer     , intent(out) :: Day
    integer     , intent(out) :: Hr
    integer     , intent(out) :: Min
    real(DP)    , intent(out) :: Sec


    ! 作業変数
    ! Work variables
    !
    integer :: StrLen
    integer :: l
    integer :: ll

    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if

    StrLen = len_trim( DateString )

    ! format of the DateString has to be "... since YYYY/MM/DD HH:MM:SS".

    search_since : do ll = 1, StrLen-5+1
      if ( DateString(ll:ll+5-1) == "since" ) exit search_since
    end do search_since
    if ( ll > StrLen-5+1 ) then
      call MessageNotify( 'E', module_name, 'Unable to find "since" in %c.', c1 = trim(FileName) )
    end if
    !
    l = ll + 5
    !
    if ( DateString(l:l) /= " " ) then
      call MessageNotify( 'E', module_name, 'Unable to find a space after "since" in %c.', c1 = trim(FileName) )
    end if
    !
    l = l + 1
    !
    search_yr : do ll = l, StrLen
      if ( DateString(ll:ll) == "-" ) exit search_yr
    end do search_yr
    if ( ll > StrLen ) then
      call MessageNotify( 'E', module_name, 'Unable to find "-" between year and month in %c.', c1 = trim(FileName) )
    end if
    read( DateString(l:ll-1), * ) Yr
    !
    l = ll + 1
    !
    search_mon : do ll = l, StrLen
      if ( DateString(ll:ll) == "-" ) exit search_mon
    end do search_mon
    if ( ll > StrLen ) then
      call MessageNotify( 'E', module_name, 'Unable to find "-" between month and day in %c.', c1 = trim(FileName) )
    end if
    read( DateString(l:ll-1), * ) Mon
    !
    l = ll + 1
    !
    search_day : do ll = l, StrLen
      if ( DateString(ll:ll) == " " ) exit search_day
    end do search_day
    if ( ll > StrLen ) then
      call MessageNotify( 'E', module_name, 'Unable to find a space between day and hour in %c.', c1 = trim(FileName) )
    end if
    read( DateString(l:ll-1), * ) Day
    !
    l = ll
    !
    if ( DateString(l:l) /= " " ) then
      call MessageNotify( 'E', module_name, 'Unable to confirm a space between day and hour in %c.', c1 = trim(FileName) )
    end if
    !
    l = l + 1
    !
    search_hr : do ll = l, StrLen
      if ( DateString(ll:ll) == ":" ) exit search_hr
    end do search_hr
    if ( ll > StrLen ) then
      call MessageNotify( 'E', module_name, 'Unable to find ":" between hour and minute in %c.', c1 = trim(FileName) )
    end if
    read( DateString(l:ll-1), * ) Hr
    !
    l = ll + 1
    !
    search_min : do ll = l, StrLen
      if ( DateString(ll:ll) == ":" ) exit search_min
    end do search_min
    if ( ll > StrLen ) then
      call MessageNotify( 'E', module_name, 'Unable to find ":" between minute and second in %c.', c1 = trim(FileName) )
    end if
    read( DateString(l:ll-1), * ) Min
    !
    l = ll + 1
    !
    search_sec : do ll = l, StrLen
      if ( ( DateString(ll:ll) == " " ) .or. ( DateString(ll:ll) == "." ) ) exit search_sec
    end do search_sec
!!$    if ( ll > StrLen ) then
!!$      call MessageNotify( 'E', module_name, 'Unable to find end of second in %c.', c1 = trim(FileName) )
!!$    end if
    read( DateString(l:ll-1), * ) Sec


  end subroutine InterpretTimeUnitString
NumMaxStruct
Variable :
NumMaxStruct :integer, save
NumMaxStructArr
Constant :
NumMaxStructArr = 25 :integer, parameter
Subroutine :
Keyword :character(*), intent(in )
: Keyword
Index :integer , intent(out)
: Index

[Source]

  subroutine SetValFromTimeSeriesFindIndex( Keyword, Index )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in ):: Keyword
                              ! 
                              ! Keyword
    integer     , intent(out):: Index
                              ! 
                              ! Index

    integer :: l


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    ! Search index of a_TSDataInfo with Keyword

    Index = 0

    search_index : do l = 1, NumMaxStruct
      if ( a_TSDataInfo( l ) % Keyword == Keyword ) then
        Index = l
        exit search_index
      end if
    end do search_index

    ! If an element of a_TSDataInfo with Keyword cannot be found, a new 
    ! element will be used. 
    if ( Index == 0 ) then
      NumMaxStruct = NumMaxStruct + 1
      Index        = NumMaxStruct
      a_TSDataInfo( Index ) % Keyword = Keyword
    end if


    if ( Index > NumMaxStructArr ) then
      call MessageNotify( 'E', module_name, 'Index is greater than NumMaxStructArr.' )
    end if


  end subroutine SetValFromTimeSeriesFindIndex
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
Var :real(DP) , intent(inout)
: 地表面温度. Surface temperature

[Source]

  subroutine SetValFromTimeSeriesWrapper0D( Keyword, FileName, VarName, Var )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in   ):: Keyword
    character(*), intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*), intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , intent(inout):: Var
                              ! 地表面温度. 
                              ! Surface temperature


    integer :: Index


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    call SetValFromTimeSeriesFindIndex( Keyword, Index )
    call SetValuesFromTimeSeries( a_TSDataInfo( Index ), FileName, VarName, Var = Var )


  end subroutine SetValFromTimeSeriesWrapper0D
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xy_Var(0:imax-1, 1:jmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature

[Source]

  subroutine SetValFromTimeSeriesWrapper2D( Keyword, FileName, VarName, xy_Var )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in   ):: Keyword
    character(*), intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*), intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , intent(inout):: xy_Var(0:imax-1, 1:jmax)
                              ! 地表面温度. 
                              ! Surface temperature


    integer :: Index


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    call SetValFromTimeSeriesFindIndex( Keyword, Index )
    call SetValuesFromTimeSeries( a_TSDataInfo( Index ), FileName, VarName, xy_Var = xy_Var )


  end subroutine SetValFromTimeSeriesWrapper2D
Subroutine :
Keyword :character(*), intent(in )
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(in )
: 地表面温度. Surface temperature
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
FlagLogVLev :logical , intent(in )
FlagLog :logical , intent(in )
FlagPositiveDef :logical , intent(in )

[Source]

  subroutine SetValFromTimeSeriesWrapper3D( Keyword, FileName, VarName, xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in   ):: Keyword
    character(*), intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*), intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , intent(in   ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
                              ! 地表面温度. 
                              ! Surface temperature
    real(DP)    , intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
                              ! 地表面温度. 
                              ! Surface temperature
    logical     , intent(in   ):: FlagLogVLev
    logical     , intent(in   ):: FlagLog
    logical     , intent(in   ):: FlagPositiveDef


    integer :: Index


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    call SetValFromTimeSeriesFindIndex( Keyword, Index )
    call SetValuesFromTimeSeries( a_TSDataInfo(Index), FileName, VarName, xyz_Press = xyz_Press, xyz_Var = xyz_Var, FlagLogVLev     = FlagLogVLev, FlagLog         = FlagLog, FlagPositiveDef = FlagPositiveDef )



  end subroutine SetValFromTimeSeriesWrapper3D
Subroutine :
TSDataInfo :type(time_series_data), intent(inout)
FileName :character(*) , intent(in )
: ファイル名. File name
VarName :character(*) , intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , optional, intent(in )
: 3 次元配列. 3D array
Var :real(DP) , optional, intent(inout)
: 2 次元配列. 2D array
xy_Var(0:imax-1, 1:jmax) :real(DP) , optional, intent(inout)
: 2 次元配列. 2D array
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , optional, intent(inout)
: 3 次元配列. 3D array
FlagLogVLev :logical , optional, intent(in )
FlagLog :logical , optional, intent(in )
FlagPositiveDef :logical , optional, intent(in )

地表面の諸々のデータを設定します. xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.

Get various data on ground. Arguments excluding "xy_SurfTemp" are configured at first only.

[Source]

  subroutine SetValuesFromTimeSeries( TSDataInfo, FileName, VarName, xyz_Press, Var, xy_Var, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
    !
    ! 地表面の諸々のデータを設定します. 
    ! xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます. 
    !
    ! Get various data on ground. 
    ! Arguments excluding "xy_SurfTemp" are configured at first only. 
    !

    ! モジュール引用 ; USE statements
    !

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! 日付および時刻の取り扱い
    ! Date and time handler
    !
    use dc_calendar, only: DCCalDateEvalSecOfYear

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! 宣言文 ; Declaration statements
    !
    implicit none

    type(time_series_data), intent(inout):: TSDataInfo
    character(*)          , intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*)          , intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , optional, intent(in   ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
                              ! 3 次元配列. 
                              ! 3D array
    real(DP)    , optional, intent(inout):: Var
                              ! 2 次元配列. 
                              ! 2D array
    real(DP)    , optional, intent(inout):: xy_Var (0:imax-1, 1:jmax)
                              ! 2 次元配列. 
                              ! 2D array
    real(DP)    , optional, intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
                              ! 3 次元配列. 
                              ! 3D array
    logical     , optional, intent(in   ):: FlagLogVLev
    logical     , optional, intent(in   ):: FlagLog
    logical     , optional, intent(in   ):: FlagPositiveDef

    ! 作業変数
    ! Work variables
    !
    real(DP):: CurrentTimeInSec
    integer :: tindex

!!$    real(DP):: xyza_VarInterpolated(0:imax-1, 1:jmax, 1:kmax, 2)

    logical :: FlagReadData

    integer :: t


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( ( .not. present( Var ) ) .and. ( .not. present( xy_Var ) ) .and. ( .not. present( xyz_Var ) ) ) then
      call MessageNotify( 'E', module_name, 'Var or xy_Var or xyz_Var have to be given.' )
    end if

    if ( ( present( Var ) ) .and. ( present( xy_Var ) ) ) then
      call MessageNotify( 'E', module_name, 'Both Var and xy_Var are not given.' )
    end if

    if ( ( present( xy_Var ) ) .and. ( present( xyz_Var ) ) ) then
      call MessageNotify( 'E', module_name, 'Both xy_Var and xyz_Var are not given.' )
    end if

    if ( ( present( xyz_Var ) ) .and. ( present( Var ) ) ) then
      call MessageNotify( 'E', module_name, 'Both xyz_Var and Var are not be given.' )
    end if

    if ( ( present( xyz_Var ) ) .and. ( .not. present( xyz_Press ) ) ) then
      call MessageNotify( 'E', module_name, 'xyz_Press has to be given, when xyz_Var is given.' )
    end if

    ! 実行文 ; Executable statement
    !
    if ( .not. associated( TSDataInfo % a_time ) ) then
      if ( present( Var ) ) then
        call StructureInit( FileName, VarName, 0, TSDataInfo )
      else if ( present( xy_Var ) ) then
        call StructureInit( FileName, VarName, 2, TSDataInfo )
      else
        call StructureInit( FileName, VarName, 3, TSDataInfo )
      end if
    end if


    ! Update values of time paying attention to leap year
    ! This is not used, because this causes error when FlagYearCyclic = .true..
    !
!!$    call UpdateTime(     &
!!$      & TSDataInfo             & ! (inout)
!!$      & )


    if ( TSDataInfo % tmax >= 2 ) then

      if ( FlagYearCyclic ) then
        CurrentTimeInSec = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )
      else
        CurrentTimeInSec = TimeN + TSDataInfo%TimeFromOriginToInitialDate
      end if

!!$      write( 6, * ) TSDataInfo%a_time(TSDataInfo%a_tindex(1)), &
!!$        & SecOfYear, TSDataInfo%a_time(TSDataInfo%a_tindex(2))


      ! Check whether the data have to be read or not
      if ( ( CurrentTimeInSec <  TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) .or. ( CurrentTimeInSec >= TSDataInfo%a_time(TSDataInfo%a_tindex(2)) ) ) then
        FlagReadData = .true.
      else
        FlagReadData = .false.
      end if
      if ( .not. FlagYearCyclic ) then
        if ( ( CurrentTimeInSec <  TSDataInfo%a_time(1)               ) .or. ( CurrentTimeInSec >= TSDataInfo%a_time(TSDataInfo%tmax) ) ) then
          FlagReadData = .false.
          CurrentTimeInSec = max( CurrentTimeInSec, TSDataInfo%a_time(1) )
          CurrentTimeInSec = min( CurrentTimeInSec, TSDataInfo%a_time(TSDataInfo%tmax) )
        end if
      end if

      if ( FlagReadData ) then
!!$      if ( ( CurrentTimeInSec <   TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) .or. &
!!$        &  ( CurrentTimeInSec >=  TSDataInfo%a_time(TSDataInfo%a_tindex(2)) ) ) then

        TSDataInfo % a_tindex(1) = 0
        TSDataInfo % a_tindex(2) = 1
        do t = 1, TSDataInfo%tmax
          if ( TSDataInfo % a_time(t) <= CurrentTimeInSec ) then
            TSDataInfo % a_tindex(1) = t
            TSDataInfo % a_tindex(2) = t+1
          end if
        end do

!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) 'in if', TSDataInfo % a_tindex(1), TSDataInfo % a_tindex(2)
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'

        ! set time index
        if ( FlagYearCyclic ) then
          tindex = TSDataInfo % a_tindex(1)
          if ( tindex == 0 ) then
            tindex = TSDataInfo % tmax
          else if ( tindex == TSDataInfo % tmax + 1 ) then
            tindex = 1
          else
            tindex = tindex
          end if
        else
          tindex = TSDataInfo % a_tindex(1)
          tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
        end if


        if ( present( Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else if ( present( xy_Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        end if

        ! set time index
        if ( FlagYearCyclic ) then
          tindex = TSDataInfo % a_tindex(2)
          if ( tindex == 0 ) then
            tindex = TSDataInfo % tmax
          else if ( tindex == TSDataInfo % tmax + 1 ) then
            tindex = 1
          else
            tindex = tindex
          end if
        else
          tindex = TSDataInfo % a_tindex(2)
          tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
        end if

        if ( present( Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else if ( present( xy_Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        end if

      end if

      if ( present( Var ) ) then
        Var = ( TSDataInfo%xyza_SavedData(0,1,1,2) - TSDataInfo%xyza_SavedData(0,1,1,1)  ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) + TSDataInfo%xyza_SavedData(0,1,1,1)
      else if ( present( xy_Var ) ) then
        xy_Var = ( TSDataInfo%xyza_SavedData(:,:,1,2) - TSDataInfo%xyza_SavedData(:,:,1,1)  ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) + TSDataInfo%xyza_SavedData(:,:,1,1)
      else
        TSDataInfo%xyz_VarTimeInterpolated = ( TSDataInfo%xyza_SavedData(:,:,:,2) - TSDataInfo%xyza_SavedData(:,:,:,1)  ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) + TSDataInfo%xyza_SavedData(:,:,:,1)

        call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyz_VarTimeInterpolated, xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
      end if

    else

      if ( present( Var ) ) then
        Var = TSDataInfo%xyza_SavedData(0,1,1,1)
      else if ( present( xy_Var ) ) then
        xy_Var = TSDataInfo%xyza_SavedData(:,:,1,1)
      else
        call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyza_SavedData(:,:,:,1), xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
      end if

    end if


  end subroutine SetValuesFromTimeSeries
Subroutine :
FileName :character(*) , intent(in )
: ファイル名. File name
VarName :character(*) , intent(in )
: 変数名. Variable name
NDims :integer , intent(in )
: 時間以外の変数の次元. Number of dimensions except for time dimension
TSDataInfo :type(time_series_data), intent(inout)

[Source]

  subroutine StructureInit( FileName, VarName, NDims, TSDataInfo )

    ! モジュール引用 ; USE statements
    !

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet, HistoryGetPointer

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! 暦と日時の取り扱い
    ! Calendar and Date handler
    !
    use dc_calendar, only: DC_CAL_DATE, DCCalInquire, DCCalDateEvalSecOfYear, DCCalDateCreate, DCCalDateDifference

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! NetCDF wrapper
    !
    use netcdf_wrapper, only: NWGetAtt, NWInqDimLen


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*)          , intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*)          , intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    integer               , intent(in   ):: NDims
                              ! 時間以外の変数の次元. 
                              ! Number of dimensions except for time dimension
    type(time_series_data), intent(inout):: TSDataInfo


    ! 作業変数
    ! Work variables
    !
    real(DP)         :: CurrentTimeInSec
!!$    real(DP), pointer:: a_time(:)
    integer          :: tindex
    integer          :: t

    character(STRING):: VLevelName

    character(STRING):: attchar

    integer:: hour_in_day, min_in_hour, day_in_year
    integer, pointer:: day_in_month_ptr(:) => null()
    real(DP):: sec_in_min, sec_in_day


    type(DC_CAL_DATE), save :: DataOriginDate
                              ! データ日時基準
                              ! Origin date of data
    integer  :: DataOriginYr
    integer  :: DataOriginMon
    integer  :: DataOriginDay
    integer  :: DataOriginHr
    integer  :: DataOriginMin
    real(DP) :: DataOriginSec


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


!!$    nullify( a_time )


    call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day      = hour_in_day  , min_in_hour      = min_in_hour  , sec_in_min       = sec_in_min )         ! (out)
    day_in_year = sum( day_in_month_ptr )
    deallocate( day_in_month_ptr )
    sec_in_day  = hour_in_day * min_in_hour * sec_in_min


    TSDataInfo % FileName = FileName
    TSDataInfo % VarName  = VarName
    TSDataInfo % NDims    = NDims


    if ( TSDataInfo % NDims == 0 ) then
      TSDataInfo % NVLevels = 1
    else if ( TSDataInfo % NDims == 2 ) then
      TSDataInfo % NVLevels = 1
    else
      VLevelName = "plev"

      call HistoryGetPointer( TSDataInfo%FileName, VLevelName, TSDataInfo % z_VLevels, flag_mpi_split = flag_mpi_split )
      TSDataInfo % NVLevels = size( TSDataInfo % z_Vlevels )
    end if


    call NWInqDimLen( TSDataInfo%FileName, 'time', TSDataInfo%tmax )


    if ( ( FlagYearCyclic ) .or. ( TSDataInfo % tmax < 2 ) ) then
      ! case in which the data are cyclic

      TSDataInfo % TimeFromOriginToInitialDate = 0.0_DP

    else
      ! case in which the data are not cyclic

      call NWGetAtt( TSDataInfo%FileName, 'time', 'units', AttChar )

      call InterpretTimeUnitString( TSDataInfo%FileName, AttChar, DataOriginYr, DataOriginMon, DataOriginDay, DataOriginHr, DataOriginMin, DataOriginSec )

      ! Check time from data origin to start time of integration
      !
      call DCCalDateCreate( year       = DataOriginYr, month      = DataOriginMon, day        = DataOriginDay, hour       = DataOriginHr  , min        = DataOriginMin, sec        = DataOriginSec, date       = DataOriginDate )
      TSDataInfo % TimeFromOriginToInitialDate = DCCalDateDifference( DataOriginDate, InitialDate )

      call MessageNotify( 'M', module_name, 'Origin time for a variable %c is %d/%d/%d %d:%d:%f.', c1 = trim(TSDataInfo%VarName), i = (/ DataOriginYr, DataOriginMon, DataOriginDay, DataOriginHr, DataOriginMin /), d = (/ DataOriginSec /) )
      call MessageNotify( 'M', module_name, 'Time from origin to initial date is %f s.', d = (/ TSDataInfo % TimeFromOriginToInitialDate /) )

    end if



    !-----
!!$    call HistoryGetPointer(               &
!!$      & TSDataInfo%FileName,              &
!!$      & 'time',                           &
!!$      & a_time,                           &
!!$      & flag_mpi_split = flag_mpi_split   &
!!$      & )
!!$    TSDataInfo % tmax = size( a_time )
!!$
!!$    call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
!!$    if ( ( attchar(1:3) == 'day' ) .or. &
!!$      &  ( attchar(1:3) == 'DAY' ) .or. &
!!$      &  ( attchar(1:3) == 'Day' ) ) then
!!$      a_time = a_time * DAY_SECONDS
!!$    else
!!$      call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
!!$    end if
    !-----


    if ( TSDataInfo % tmax >= 2 ) then

      if ( FlagYearCyclic ) then
        CurrentTimeInSec = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )
      else
        CurrentTimeInSec = TimeN + TSDataInfo%TimeFromOriginToInitialDate
      end if

      !-----
!!$      allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
!!$      TSDataInfo % a_time(0) = - ( YEAR_DAYS * DAY_SECONDS - a_time(TSDataInfo%tmax) )
!!$      do t = 1, TSDataInfo%tmax
!!$        TSDataInfo % a_time(t) = a_time(t)
!!$      end do
!!$      TSDataInfo % a_time(TSDataInfo%tmax+1) = YEAR_DAYS * DAY_SECONDS + a_time(1)
!!$      deallocate( a_time )
      !-----


      allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
      call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
      call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )

      if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then

        ! convert unit of time from day to sec
        TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
      else
        call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
      end if

      ! set time in hallo regions
      if ( FlagYearCyclic ) then
        TSDataInfo % a_time(0                ) = - ( day_in_year * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
        TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year * sec_in_day + TSDataInfo % a_time(1              )
      else
        TSDataInfo % a_time(0                ) = TSDataInfo % a_time(1                ) - 1.0_DP

        TSDataInfo % a_time(TSDataInfo%tmax+1) = TSDataInfo % a_time(TSDataInfo%tmax  ) + 1.0_DP
      end if


      allocate( TSDataInfo % a_tindex(1:2) )
      allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:2) )

      TSDataInfo % a_tindex(1) = 0
      TSDataInfo % a_tindex(2) = 1
      do t = 1, TSDataInfo%tmax
        if ( TSDataInfo % a_time(t) <= CurrentTimeInSec ) then
          TSDataInfo % a_tindex(1) = t
          TSDataInfo % a_tindex(2) = t+1
        end if
      end do

      ! set time index
      if ( FlagYearCyclic ) then
        tindex = TSDataInfo % a_tindex(1)
        if ( tindex == 0 ) then
          tindex = TSDataInfo % tmax
        else if ( tindex == TSDataInfo % tmax + 1 ) then
          tindex = 1
        else
          tindex = tindex
        end if
      else
        tindex = TSDataInfo % a_tindex(1)
        tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
      end if


      if ( TSDataInfo % NDims == 0 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      end if

      ! set time index
      if ( FlagYearCyclic ) then
        tindex = TSDataInfo % a_tindex(2)
        if ( tindex == 0 ) then
          tindex = TSDataInfo % tmax
        else if ( tindex == TSDataInfo % tmax + 1 ) then
          tindex = 1
        else
          tindex = tindex
        end if
      else
        tindex = TSDataInfo % a_tindex(2)
        tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
      end if

      if ( TSDataInfo % NDims == 0 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      end if

      allocate( TSDataInfo%xyz_VarTimeInterpolated(0:imax-1, 1:jmax, 1:TSDataInfo%NVLevels) )

    else

      !-----
!!$      allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
!!$      do t = 1, TSDataInfo%tmax
!!$        TSDataInfo % a_time(t) = a_time(t)
!!$      end do
      !-----


      allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
      call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
      call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
      if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then
        ! convert unit of time from day to sec
        TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
      else
        call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
      end if

      allocate( TSDataInfo % a_tindex(1:1) )
      allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:1) )

      TSDataInfo % a_tindex(1) = 1

      if ( TSDataInfo % NDims == 0 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
      else if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
      end if

    end if


  end subroutine StructureInit
TSDataInfoCH4
Variable :
TSDataInfoCH4 :type(time_series_data), save
TSDataInfoCI
Variable :
TSDataInfoCI :type(time_series_data), save
TSDataInfoCO2
Variable :
TSDataInfoCO2 :type(time_series_data), save
TSDataInfoDOD
Variable :
TSDataInfoDOD :type(time_series_data), save
TSDataInfoN2O
Variable :
TSDataInfoN2O :type(time_series_data), save
TSDataInfoO3
Variable :
TSDataInfoO3 :type(time_series_data), save
TSDataInfoSIC
Variable :
TSDataInfoSIC :type(time_series_data), save
TSDataInfoSST
Variable :
TSDataInfoSST :type(time_series_data), save
TSDataInfoSolarConst
Variable :
TSDataInfoSolarConst :type(time_series_data), save
Subroutine :
TSDataInfo :type(time_series_data), intent(inout)

[Source]

  subroutine UpdateTime( TSDataInfo )

    ! モジュール引用 ; USE statements
    !

    ! 暦と日時の取り扱い
    ! Calendar and Date handler
    !
    use dc_calendar, only: DC_CAL_DATE             ! 日時を表現するデータ型.
                                ! Data type for date and time

    ! 日付および時刻の取り扱い
    ! Date and time handler
    !
    use dc_calendar, only: DCCalInquire, DCCalDateCreate, DCCalDateInquire, DCCalDateChkLeapYear

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! 宣言文 ; Declaration statements
    !
    implicit none

    type(time_series_data), intent(inout):: TSDataInfo


    ! 作業変数
    ! Work variables
    !
    integer           :: hour_in_day, min_in_hour, day_in_year
    integer, pointer  :: day_in_month_ptr(:) => null()
    real(DP)          :: sec_in_min, sec_in_day

    integer           :: year
    type(DC_CAL_DATE) :: PreYearDate


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( TSDataInfo % tmax >= 2 ) then

      call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day      = hour_in_day  , min_in_hour      = min_in_hour  , sec_in_min       = sec_in_min )         ! (out)
      day_in_year = sum( day_in_month_ptr )
      deallocate( day_in_month_ptr )
      sec_in_day  = hour_in_day * min_in_hour * sec_in_min


      ! Set TSDataInfo % a_time(0)
      !

      call DCCalDateInquire( year       = year, elapse_sec = TimeN, date       = InitialDate )
      call DCCalDateCreate( year       = year - 1, month      = 1, day        = 1, hour       = 0, min        = 0, sec        = 0.0_DP, date       = PreYearDate )

      if ( DCCalDateChkLeapYear( 0.0_DP, PreYearDate ) ) then
        TSDataInfo % a_time(0                ) = - ( ( day_in_year + 1 ) * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
      else
        TSDataInfo % a_time(0                ) = - (   day_in_year       * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
      end if


      ! Set TSDataInfo % a_time(TSDataInfo%tmax+1)
      !

      if ( DCCalDateChkLeapYear( TimeN, InitialDate ) ) then
        TSDataInfo % a_time(TSDataInfo%tmax+1) = ( day_in_year + 1 ) * sec_in_day + TSDataInfo % a_time(1              )
      else
        TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year       * sec_in_day + TSDataInfo % a_time(1              )
      end if


    end if


  end subroutine UpdateTime
Subroutine :
NVLevels :integer , intent(in )
z_VLevelsIn(1:NVLevels) :real(DP), intent(in )
xyz_VarIn(0:imax-1, 1:jmax, 1:NVLevels) :real(DP), intent(in )
xyz_VarOut(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
FlagLogVLev :logical , intent(in ), optional
FlagLog :logical , intent(in ), optional
FlagPositiveDef :logical , intent(in ), optional

[Source]

  subroutine VerticalInterpolation( NVLevels, z_VLevelsIn, xyz_VarIn, xyz_VLevelsOut, xyz_VarOut, FlagLogVLev, FlagLog, FlagPositiveDef )

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer , intent(in ):: NVLevels
    real(DP), intent(in ):: z_VLevelsIn(1:NVLevels)
    real(DP), intent(in ):: xyz_VarIn  (0:imax-1, 1:jmax, 1:NVLevels)
    real(DP), intent(in ):: xyz_VlevelsOut(0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(out):: xyz_VarOut    (0:imax-1, 1:jmax, 1:kmax)
    logical , intent(in ), optional:: FlagLogVLev
    logical , intent(in ), optional:: FlagLog
    logical , intent(in ), optional:: FlagPositiveDef


    ! 作業変数
    ! Work variables
    !
    logical:: FlagLogVLevLV
    logical:: FlagLogLV
    logical:: FlagPositiveDefLV
    integer:: i
    integer:: j
    integer:: k
    integer:: kk
    integer:: xyz_kk(0:imax-1, 1:jmax, 1:kmax)


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if

    ! Check order of vertical levels
    !
    if ( z_VlevelsIn(1) < z_VlevelsIn(2) ) then
      call MessageNotify( 'E', module_name, 'The order of vertical levels is inappropriate.' )
    end if


    ! Flags are checked
    !
    if ( present( FlagLogVLev ) ) then
      FlagLogVLevLV = FlagLogVLev
    else
      FlagLogVLevLV = .false.
    end if
    if ( present( FlagLog ) ) then
      FlagLogLV = FlagLog
    else
      FlagLogLV = .false.
    end if
    if ( present( FlagPositiveDef ) ) then
      FlagPositiveDefLV = FlagPositiveDef
    else
      FlagPositiveDefLV = .false.
    end if


    xyz_kk = 1

    do kk = 1, NVLevels-1

      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax-1
            if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(kk) ) then
              xyz_kk(i,j,k) = kk
            end if
          end do
        end do
      end do

    end do


    if ( FlagLogVLevLV ) then

      if ( FlagLogLV ) then
        ! log-log

        do k = 1, kmax
          do j = 1, jmax
            do i = 0, imax-1

!!$          if ( xyz_VLevelsOut(i,j,k) > z_VLevelsIn(1) ) then
!!$            xyz_VarOut(i,j,k) = xyz_VarIn(i,j,1)
!!$
!!$!          else if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(NVLevels) ) then
!!$!            call MessageNotify( 'E', module_name, 'Vertical level is out of given range.' )
!!$!!            xyz_VarOut(i,j,k) = 0.0d0
!!$
!!$          else
!!$
!!$            xyz_VarOut(i,j,k) = &
!!$              &   ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1)     - xyz_VarIn(i,j,xyz_kk(i,j,k)) ) &
!!$              & / log( z_VLevelsIn   (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k))   ) &
!!$              & * log( xyz_VLevelsOut(i,j,k)           / z_VLevelsIn(xyz_kk(i,j,k))   ) &
!!$              & + xyz_VarIn(i,j,xyz_kk(i,j,k))
!!$
!!$          end if


              xyz_VarOut(i,j,k) = log(   ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) + 1.0d-100 ) / ( xyz_VarIn(i,j,xyz_kk(i,j,k)  ) + 1.0d-100 )  ) / log(   z_VLevelsIn   (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k))      ) * log(   xyz_VLevelsOut(i,j,k) / z_VLevelsIn(xyz_kk(i,j,k))      ) + log( xyz_VarIn(i,j,xyz_kk(i,j,k)) + 1.0d-100 )
              xyz_VarOut(i,j,k) = exp( xyz_VarOut(i,j,k) )

            end do
          end do
        end do

      else
        ! log-linear

        do k = 1, kmax
          do j = 1, jmax
            do i = 0, imax-1

              xyz_VarOut(i,j,k) = (   xyz_VarIn(i,j,xyz_kk(i,j,k)+1) - xyz_VarIn(i,j,xyz_kk(i,j,k)  )     ) / log(   z_VLevelsIn   (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k))      ) * log(   xyz_VLevelsOut(i,j,k) / z_VLevelsIn(xyz_kk(i,j,k))      ) + xyz_VarIn(i,j,xyz_kk(i,j,k))

            end do
          end do
        end do

      end if

    else

      if ( FlagLogLV ) then
        ! linear-log

        do k = 1, kmax
          do j = 1, jmax
            do i = 0, imax-1

              xyz_VarOut(i,j,k) = log(   ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) + 1.0d-100 ) / ( xyz_VarIn(i,j,xyz_kk(i,j,k)  ) + 1.0d-100 )  ) / (   z_VLevelsIn(xyz_kk(i,j,k)+1) - z_VLevelsIn(xyz_kk(i,j,k)  )    ) * (   xyz_VLevelsOut(i,j,k) - z_VLevelsIn(xyz_kk(i,j,k))      ) + log( xyz_VarIn(i,j,xyz_kk(i,j,k)) + 1.0d-100 )
              xyz_VarOut(i,j,k) = exp( xyz_VarOut(i,j,k) )

            end do
          end do
        end do

      else
        ! linear-linear

        do k = 1, kmax
          do j = 1, jmax
            do i = 0, imax-1

              xyz_VarOut(i,j,k) = (   xyz_VarIn(i,j,xyz_kk(i,j,k)+1) - xyz_VarIn(i,j,xyz_kk(i,j,k)  ) ) / (   z_VLevelsIn(xyz_kk(i,j,k)+1) - z_VLevelsIn(xyz_kk(i,j,k)  )   ) * (   xyz_VLevelsOut(i,j,k) - z_VLevelsIn(xyz_kk(i,j,k))     ) + xyz_VarIn(i,j,xyz_kk(i,j,k))

            end do
          end do
        end do

      end if

    end if


    if ( FlagPositiveDefLV ) then

      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax-1

            if ( xyz_VarOut(i,j,k) < 0.0d0 ) then
              xyz_VarOut(i,j,k) = 0.0d0
            end if

          end do
        end do
      end do

    end if


!!$    i = 0
!!$    j = jmax / 2
!!$    do k = 1, NVLevels
!!$      write( 92, * ) z_VLevelsIn(k), xyz_VarIn(i,j,k)
!!$    end do
!!$    write( 92, * )
!!$    call flush( 92 )
!!$    do k = 1, kmax
!!$      write( 93, * ) xyz_VLevelsOut(i,j,k), xyz_VarOut(i,j,k)
!!$    end do
!!$    write( 93, * )
!!$    call flush( 93 )
!!$    stop


  end subroutine VerticalInterpolation
a_TSDataInfo
Variable :
a_TSDataInfo( NumMaxStructArr ) :type(time_series_data), save
flag_mpi_split
Variable :
flag_mpi_split = .true. :logical, save
module_name
Constant :
module_name = ‘read_time_series_from_file‘ :character(*), parameter
: モジュールの名称. Module name
read_time_series_inited
Variable :
read_time_series_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
time_series_data
Derived Type :
Keyword :character(STRING)
: Keyword
FileName :character(STRING)
: ファイル名. File name
VarName :character(STRING)
: 変数名. Variable name
NDims :integer
tmax :integer
NVLevels :integer
z_VLevels(:) :real(DP), pointer
a_time(:) :real(DP), pointer
a_tindex(:) :integer , pointer
xyza_SavedData(:,:,:,:) :real(DP), pointer
xyz_VarTimeInterpolated(:,:,:) :real(DP), pointer
TimeFromOriginToInitialDate :real(DP)
version
Constant :
version = ’$Name: dcpam5-20130921 $’ // ’$Id: read_time_series.f90,v 1.17 2013-03-01 14:16:09 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version