| Class | StoreMixRt |
| In: |
setup/storemixrt.f90
|
積算値を保管するための変数型モジュール.
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
移流項の保管
subroutine StoreMixRtAdv( Work )
!移流項の保管
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Adv + Work
xza_Adv = Work2
! CalNum = CalNum + 1
end subroutine StoreMixRtAdv
| Subroutine : |
保管した値のクリアー
subroutine StoreMixRtClean( )
!保管した値のクリアー
za_Adv = 0.0d0
za_Turb = 0.0d0
za_Diff = 0.0d0
za_Flux = 0.0d0
za_Rain = 0.0d0
za_Fill1 = 0.0d0
za_Fill2 = 0.0d0
za_Cond = 0.0d0
! za_Asln = 0.0d0
xza_Adv = 0.0d0
xza_Turb = 0.0d0
xza_Diff = 0.0d0
xza_Flux = 0.0d0
xza_Rain = 0.0d0
xza_Fill1 = 0.0d0
xza_Fill2 = 0.0d0
xza_Cond = 0.0d0
! xza_Asln = 0.0d0
! CalNum = 1.0d-40 !ゼロ割を禁止
end subroutine StoreMixRtClean
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
凝結に伴う変化
subroutine StoreMixRtCond( Work )
!凝結に伴う変化
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Cond + Work
xza_Cond = Work2
end subroutine StoreMixRtCond
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
数値拡散項の保管
subroutine StoreMixRtDiff( Work )
!数値拡散項の保管
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Diff + Work
xza_Diff = Work2
end subroutine StoreMixRtDiff
| Subroutine : | |
| Work1(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
穴埋めプログラムによる変化
subroutine StoreMixRtFill1( Work1 )
!穴埋めプログラムによる変化
implicit none
real(8), intent(in) :: Work1(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: WorkA(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
WorkA = Work1 + xza_Fill1
xza_Fill1 = WorkA
end subroutine StoreMixRtFill1
| Subroutine : | |
| Work1(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
穴埋めプログラム(2)による変化
subroutine StoreMixRtFill2( Work1 )
!穴埋めプログラム(2)による変化
implicit none
real(8), intent(in) :: Work1(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: WorkA(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
WorkA = Work1 + xza_Fill2
xza_Fill2 = WorkA
end subroutine StoreMixRtFill2
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
地表面フラックスによる変化
subroutine StoreMixRtFlux( Work )
!地表面フラックスによる変化
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Flux + Work
xza_Flux = Work2
end subroutine StoreMixRtFlux
| Subroutine : |
保管した値の水平平均値
subroutine StoreMixRtMeanX( )
!保管した値の水平平均値
real(8) :: CalNum
CalNum = TimeDisp / DelTimeLong
za_Adv = aa_MeanX_aaa( xza_Adv ) / CalNum
za_Turb = aa_MeanX_aaa( xza_Turb ) / CalNum
za_Diff = aa_MeanX_aaa( xza_Diff ) / CalNum
za_Flux = aa_MeanX_aaa( xza_Flux ) / CalNum
za_Rain = aa_MeanX_aaa( xza_Rain ) / CalNum
za_Fill1 = aa_MeanX_aaa( xza_Fill1 ) / CalNum
za_Fill2 = aa_MeanX_aaa( xza_Fill2 ) / CalNum
za_Cond = aa_MeanX_aaa( xza_Cond ) / CalNum
! za_Asln = aa_MeanX_aaa( xza_Asln ) / CalNum
end subroutine StoreMixRtMeanX
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
降雨の重力落下に伴う変化
subroutine StoreMixRtRain( Work )
!降雨の重力落下に伴う変化
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Rain + Work
xza_Rain = Work2
end subroutine StoreMixRtRain
| Subroutine : | |
| Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) : | real(8), intent(in) |
乱流項の保管
subroutine StoreMixRtTurb( Work )
!乱流項の保管
implicit none
real(8), intent(in) :: Work(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
real(8) :: Work2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum)
Work2 = xza_Turb + Work
xza_Turb = Work2
end subroutine StoreMixRtTurb
| Subroutine : |
初期化ルーチン
subroutine StoreMixRt_Init( )
!初期化ルーチン
allocate( za_Adv(DimZMin:DimZMax, SpcNum), za_Turb(DimZMin:DimZMax, SpcNum), za_Diff(DimZMin:DimZMax, SpcNum), za_Flux(DimZMin:DimZMax, SpcNum), za_Rain(DimZMin:DimZMax, SpcNum), za_Fill1(DimZMin:DimZMax, SpcNum), za_Fill2(DimZMin:DimZMax, SpcNum), za_Cond(DimZMin:DimZMax, SpcNum), xza_Adv(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Turb(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Diff(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Flux(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Rain(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Fill1(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Fill2(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum), xza_Cond(DimXMin:DimXMax, DimZMin:DimZMax, SpcNum) )
call StoreMixRtClean()
end subroutine StoreMixRt_Init