Class: NAMELIST

Dynamics_nml( AlphaSound, AlphaNDiff, AlphaNDiff2, NDiffRatio, beta, FactorBuoyTemp, FactorBuoyMolWt, FactorBuoyLoading )

NAMELIST :

AlphaSound = 5.0d-2 :

real(DP)

:	音波減衰項の係数 (気象庁数値予報課報告・別冊49 より)

AlphaNDiff = 1.0d-3 :

real(DP)

:	4次の数値拡散の係数. CReSS マニュアルより

AlphaNDiff2 = 0.0d0 :

real(DP)

:	2次の数値拡散の係数. CReSS マニュアルより

NDiffRatio = 1.0d0 :

real(DP)

:	速度に対する粘性を上げる場合は数字を 1 以上にする.

beta = 1.0d0 :

real(DP), save

:	クランクニコルソン法なら 0.5 完全陰解法なら 1

FactorBuoyTemp = 1.0d0 :

real(DP), save

:	浮力 (温度の寄与) の有無考慮しない場合は値をゼロにする.

FactorBuoyMolWt = 1.0d0 :

real(DP), save

:	浮力 (分子量効果) の有無考慮しない場合は値をゼロにする.

FactorBuoyLoading = 1.0d0 :

real(DP), save

:	浮力 (荷重効果) の有無考慮しない場合は値をゼロにする.

ファイルオープン. 情報取得.

This namelist group name is input/output in DynamicsHEVI#Dynamics_Init

arare4fileio_nml( Arare4Prefix )

*NAMELIST* :
`Arare4Prefix` `= "arare4_"` :	`character(STRING), save`

This namelist group name is input/output in Arare4fileio#Arare4fileio_Init

axesset_nml( xmin, xmax, ymin, ymax, zmin, zmax )

NAMELIST :

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in axesset#axesset_init

cloudphys_k1969_nml( Planet, FactorJ, AutoConvTime, QMixCr, FlagDExnerDtCloud, FlagDExnerDtFall, FactorFallRain, FactorCloud2Rain, FactorRain2Gas )

NAMELIST :

Planet = "" : character(STRING)

FactorJ = 1.0d0 :

real(DP), save

:	雲物理過程のパラメータ木星では 3.0d0 地球では 1.0d0 とする

AutoConvTime = 1.0d3 :

real(DP), save

:	併合成長の時定数 [sec]

QMixCr = 1.0d-3 :

real(DP), save

:	併合成長を生じる臨界混合比 [kg/kg]

FlagDExnerDtCloud = .true. : logical, save

FlagDExnerDtFall = .true. : logical, save

FactorFallRain = 1.0d0 :

real(DP), save

:	雨の落下の有無雨を落下させない場合は値をゼロにする.

FactorCloud2Rain = 1.0d0 :

real(DP), save

:	雲から雨への変換の有無雨へ変換させない場合は値をゼロにする.

FactorRain2Gas = 1.0d0 :

real(DP), save

:	雨から蒸気への変換の有無蒸気へ変換させない場合は値をゼロにする.

This namelist group name is input/output in cloudphys_k1969#Cloudphys_K1969_Init

cloudphys_marscond_nml( DensIce, NumAerosol, RadiAerosol, Kd, SatRatioCr, SatRtWetAdia, CDensCr )

NAMELIST :

DensIce = 1.565d3 :

real(DP), save

:	固相の密度 [kg/m^3]

NumAerosol = 0.0d0 :

real(DP), save

:	エアロゾルの数密度 [1/kg]

RadiAerosol = 0.0d0 :

real(DP), save

:	エアロゾルの数密度 [1/kg]

Kd = 0.0d0 :

real(DP), save

:	大気の熱伝導係数 [W/K m]

SatRatioCr = 0.0d0 :

real(DP), save

:

臨界飽和比 []

SatRtWetAdia = 0.0d0 :

real(DP), save

:	湿潤断熱線の飽和比 []

CDensCr = 5.0d-5 : real(DP), save

This namelist group name is input/output in Cloudphys_MarsCond#cloudphys_marscond_init

composition_nml( SpcWetSymbol, SpcWetMolFr )

NAMELIST :

SpcWetSymbol(10) :

character(STRING)

:

湿潤成分の化学種名

SpcWetMolFr(10) :

real(DP)

:	湿潤成分の化学種の存在度

This namelist group name is input/output in composition#composition_init

constants_nml( Grav, PressBasis, TempSfc, PressSfc, SpcDrySymbol, SpcDryMolFr, DayTime, CpDry, MolWtDry )

NAMELIST :

Grav = 9.8d0 :

real(DP), save, public

:	重力 [m/s^2]

PressBasis = 965.0d0 :

real(DP), save, public

:	温位の基準圧力 [Pa]

TempSfc = 300.0d0 :

real(DP), save, public

:

地表面温度 [K]

PressSfc = 965.0d0 :

real(DP), save, public

:	地表面圧力 [Pa]

SpcDrySymbol(5) :

character(20)

:

乾燥成分の化学種名

SpcDryMolFr(5) :

real(DP)

:	乾燥成分の化学種の存在度

DayTime = 86400.0d0 :

real(DP), save, public

:	1 日の長さ [s]

CpDry = 0.0d0 :

real(DP), save, public

:	乾燥成分の定圧比熱 [J/K kg]

MolWtDry = 0.0d0 :

real(DP), save, public

:	乾燥成分の分子量 [kg/mol]

This namelist group name is input/output in constants#constants_Init

damping_nml( Time, DepthH, DepthV )

NAMELIST :

Time : real(DP)

DepthH :

real(DP)

:	スポンジ層の厚さ(水平方向)

DepthV :

real(DP)

:	スポンジ層の厚さ(鉛直方向)

This namelist group name is input/output in Damping#Damping_Init

deepconv_main_nml( FlagTurbMethod, FlagRadMethod, FlagCloudMethod, FlagSurfaceMethod )

*NAMELIST* :
`FlagTurbMethod` `= ""` :	`character(STRING)`
`FlagRadMethod` `= ""` :	`character(STRING)`
`FlagCloudMethod` `= ""` :	`character(STRING)`
`FlagSurfaceMethod` `= ""` :	`character(STRING)`

デフォルト値の設定 Default values settings

This namelist group name is input/output in ../src/main/arare.f90#deepconv_arare

deepconv_main_nml( FlagTurbMethod, FlagRadMethod, FlagCloudMethod, FlagSurfaceMethod )

*NAMELIST* :
`FlagTurbMethod` `= ""` :	`character(STRING)`
`FlagRadMethod` `= ""` :	`character(STRING)`
`FlagCloudMethod` `= ""` :	`character(STRING)`
`FlagSurfaceMethod` `= ""` :	`character(STRING)`

デフォルト値の設定 Default values settings

This namelist group name is input/output in ../src/main/arare.f90#deepconv_main

fileset_nml( FileTitle, FileSource, FileInstitution )

NAMELIST :

FileTitle = ‘cloud moist convection experiment‘ :

character(STRING), save, public

:	実験名. Title of experiment

FileSource = ‘deepconv/arare5 (www.gfd-dennou.org/library/deepconv)’ :

character(STRING), save, public

:	データファイル作成プログラム名. Source of data file

FileInstitution = ‘GFD Dennou Club (www.gfd-dennou.org)’ :

character(STRING), save, public

:	データファイル作成者/グループ. Institution or person that changes data files for the last time

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in fileset#fileset_init

gridset_nml( NX, NY, NZ, NCMAX, Xmg, Ymg, Zmg )

NAMELIST :

NX = 10 :

integer, public, save

:

x 方向格子点数

NY = 10 :

integer, public, save

:

y 方向格子点数

NZ = 10 :

integer, public, save

:

z 方向格子点数

NCMAX = 3 :

integer, public, save

:

組成配列要素数

Xmg = 4 :

integer, public, save

:	x 方向糊代格子点数

Ymg = 4 :

integer, public, save

:	y 方向糊代格子点数

Zmg = 4 :

integer, public, save

:	z 方向糊代格子点数

This namelist group name is input/output in gridset#gridset_init

initialdata_basic_nml( Humidity, TempTr, DHight )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_basic_nml( Humidity, TempTr, DHight )

NAMELIST :

Humidity = 0.0d0 :

real(DP)

:	相対湿度 Gauss 用

TempTr = 100.0d0 :

real(DP)

:	対流圏界面の温度 [k]

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_gauss_nml( PTempMax, ExnerMax, QMixMax, Xc, Xr, Yc, Yr, Zc, Zr )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_gauss_nml( PTempMax, ExnerMax, QMixMax, Xc, Xr, Yc, Yr, Zc, Zr )

NAMELIST :

PTempMax = 0.0d0 :

real(DP)

:

最大値

ExnerMax = 0.0d0 :

real(DP)

:

最大値

QMixMax = 0.0d0 :

real(DP)

:

最大値

Xc = 0.0d0 :

real(DP)

:	擾乱の中心位置(X方向)

Xr = 0.0d0 :

real(DP)

:	擾乱の半径(X方向)

Yc = 0.0d0 :

real(DP)

:	擾乱の中心位置(Y方向)

Yr = 0.0d0 :

real(DP)

:	擾乱の半径(Y方向)

Zc = 0.0d0 :

real(DP)

:	擾乱の中心位置(鉛直方向)

Zr = 0.0d0 :

real(DP)

:	擾乱の半径(鉛直方向) Therma-Random 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_moist_nml( Humidity )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_moist_nml( Humidity )

NAMELIST :

Humidity = 0.0d0 :

real(DP)

:	相対湿度 Gauss 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_random_nml( PTempMax, ExnerMax, QMixMax, Zpos )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_random_nml( PTempMax, ExnerMax, QMixMax, Zpos )

NAMELIST :

PTempMax = 0.0d0 :

real(DP)

:

最大値

ExnerMax = 0.0d0 :

real(DP)

:

最大値

QMixMax = 0.0d0 :

real(DP)

:

最大値

Zpos = 0.0d0 :

real(DP)

:	擾乱の Z 座標 [m] Rectangle 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_rectangle_nml( QMixMax, PTempMax, XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax )

NAMELIST :

   NAMELIST /initialdata_disturb_dryreg_nml/ &
     & XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_rectangle_nml( QMixMax, PTempMax, XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax )

NAMELIST :

QMixMax = 0.0d0 :

real(DP)

:

最大値

PTempMax = 0.0d0 :

real(DP)

:

最大値

XposMin = 0.0d0 :

real(DP)

:	乾燥域の X 座標 [m]

YposMin = 0.0d0 :

real(DP)

:	乾燥域の Y 座標 [m]

ZposMin = 0.0d0 :

real(DP)

:	乾燥域の Z 座標 [m]

XposMax = 0.0d0 :

real(DP)

:	乾燥域の X 座標 [m]

YposMax = 0.0d0 :

real(DP)

:	乾燥域の Y 座標 [m]

ZposMax = 0.0d0 :

real(DP)

:	乾燥域の Z 座標 [m]

NAMELIST /initialdata_disturb_dryreg_nml/ &

  & XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_nml( FlagBasic, FlagDisturb, FlagDisturbPTemp, FlagDisturbExner, FlagDisturbQMix, FlagDisturbWind )

*NAMELIST* :
`FlagBasic` `= ""` :	`character(STRING)`
`FlagDisturb` `= ""` :	`character(STRING)`
`FlagDisturbPTemp` `= ""` :	`character(STRING)`
`FlagDisturbExner` `= ""` :	`character(STRING)`
`FlagDisturbQMix` `= ""` :	`character(STRING)`
`FlagDisturbWind` `= ""` :	`character(STRING)`

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_nml( FlagBasic, FlagDisturb, FlagDisturbPTemp, FlagDisturbExner, FlagDisturbQMix, FlagDisturbWind )

*NAMELIST* :
`FlagBasic` `= ""` :	`character(STRING)`
`FlagDisturb` `= ""` :	`character(STRING)`
`FlagDisturbPTemp` `= ""` :	`character(STRING)`
`FlagDisturbExner` `= ""` :	`character(STRING)`
`FlagDisturbQMix` `= ""` :	`character(STRING)`
`FlagDisturbWind` `= ""` :	`character(STRING)`

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_takemi2007_nml( FlagEnv, FlagWind, VelXSfc )

NAMELIST :

FlagEnv = "" : character(STRING)

FlagWind = "" : character(STRING)

VelXSfc :

real(DP), save

:

地表の速度

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in initialdata_takemi2007#initialdata_takemi2007_init

radiation_heatbalance_nml( RadCoolRate, HeightHeatUp, HeightHeatDown, HeightCoolUp, HeightCoolDown, FlagDExnerDtRad )

NAMELIST :

RadCoolRate = 0.0d0 :

real(DP),save

:	一様放射加熱率 [K/day]

HeightHeatUp = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の上限

HeightHeatDown = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の下限

HeightCoolUp = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の上限

HeightCoolDown = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の下限

FlagDExnerDtRad = .true. : logical, save

This namelist group name is input/output in Radiation_HeatBalance#Radiation_heatbalance_init

radiation_simple_nml( RadHeatRate, HeightUp, HeightDown, FlagDExnerDtRad )

NAMELIST :

RadHeatRate = 0.0d0 :

real(DP)

:	一様放射加熱率 [K/day]

HeightUp = 0.0d0 :

real(DP)

:	放射強制を与える鉛直領域の上限

HeightDown = 0.0d0 :

real(DP)

:	放射強制を与える鉛直領域の下限

FlagDExnerDtRad = .true. : logical, save

This namelist group name is input/output in Radiation_Simple#Radiation_Simple_init

restartfileio_nml( InputFile, OutputFile )

*NAMELIST* :
`InputFile` `= "input.nc"` :	`character(STRING), save, private`
`OutputFile` `= "output.nc"` :	`character(STRING), save, private`

This namelist group name is input/output in ReStartFileIO#ReStartFileio_Init

surface_flux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, VelMaxForVel, VelMaxForTemp, VelMaxForQVap, VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax, FlagFixFricTimeConstAtLB, FricTimeConstAtLB, LowLatFricAtLB, FlagFixHeatFluxAtLB, HeatFluxAtLB, FlagFixMassFluxAtLB, MassFluxAtLB, Vel0 )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

VelMinForRi :

real(DP), save

:	$ R_i $ 数用風最小値. Minimum value of velocity for $ R_i $ number

VelMinForVel :

real(DP), save

:	運動量用風最小値. Minimum value of velocity for momentum

VelMinForTemp :

real(DP), save

:	熱用風最小値. Minimum value of velocity for thermal

VelMinForQVap :

real(DP), save

:	水蒸気用風最小値. Minimum value of velocity for vapor

VelMaxForVel :

real(DP), save

:	運動量用風最大値. Maximum value of velocity for momentum

VelMaxForTemp :

real(DP), save

:	熱用風最大値. Maximum value of velocity for thermal

VelMaxForQVap :

real(DP), save

:	水蒸気用風最大値. Maximum value of velocity for vapor

VelBulkCoefMin :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QVapBulkCoefMin :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QVapBulkCoefMax :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

FlagFixFricTimeConstAtLB : logical , save

FricTimeConstAtLB :

real(DP), save

:	下部境界摩擦の時定数 (s). Time constant of surface friction (s).

LowLatFricAtLB :

real(DP), save

:	下部境界摩擦が働く最低緯度 (degree). Lowest latitude where the friction is applied (degree)

FlagFixHeatFluxAtLB : logical , save

HeatFluxAtLB :

real(DP), save

:	下部境界での熱フラックス (W m-2). Heat flux at the lower boundary (W m-2).

FlagFixMassFluxAtLB : logical , save

MassFluxAtLB :

real(DP), save

:	下部境界での質量フラックス (W m-2). 実際にはゼロに固定するために使う程度にしか使えないだろう. Mass flux at the lower boundary (kg m-2 s-1).

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

デフォルト値については初期化手続 "surface_flux_bulk#SurfaceFluxInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_flux_bulk#SurfaceFluxInit" for the default values.

This namelist group name is input/output in surfaceflux_bulk_core#SurfaceFluxInit

surfaceflux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, FlagDExnerDtSurf, VelMinForRi, SfcRoughLength, Vel0, VelBulkCoefMin, TempBulkCoefMin, QmixBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QmixBulkCoefMax )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

FlagDExnerDtSurf = .true. :

logical, save

:	Flag for diabatice heating term in pressure equation

VelMinForRi = 1.0d-8 :

real(DP), save

:	リチャード数計算用速度下限値 Lower limit of velocity for Ri

SfcRoughLength = 1.0d-2 :

real(DP), save

:	祖度長さ Roughness length

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

VelBulkCoefMin = 0.0d0 :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin = 0.0d0 :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QmixBulkCoefMin = 0.0d0 :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax = 1.0d2 :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax = 1.0d2 :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QmixBulkCoefMax = 1.0d2 :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

This namelist group name is input/output in Surfaceflux_bulk#Surfaceflux_Bulk_init

surfaceflux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, SfcRoughLength, Vel0, VelBulkCoefMin, TempBulkCoefMin, QmixBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QmixBulkCoefMax )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

VelMinForRi = 1.0d-8 :

real(DP), save

:	リチャード数計算用速度下限値 Lower limit of velocity for Ri

SfcRoughLength = 1.0d-2 :

real(DP), save

:	祖度長さ Roughness length

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

VelBulkCoefMin = 0.0d0 :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin = 0.0d0 :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QmixBulkCoefMin = 0.0d0 :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax = 1.0d2 :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax = 1.0d2 :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QmixBulkCoefMax = 1.0d2 :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

This namelist group name is input/output in Surfaceflux_bulk_l1979#Surfaceflux_Bulk_init

surfaceflux_const_nml( SfcXMomFluxBtm, SfcXMomFluxTop, SfcYMomFluxBtm, SfcYMomFluxTop, SfcHeatFluxBtm, SfcHeatFluxTop, SfcQmixFluxBtm, SfcQmixFluxTop, FlagDExnerDtSurf )

*NAMELIST* :
`SfcXMomFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcXMomFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcYMomFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcYMomFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcHeatFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcHeatFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcQmixFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcQmixFluxTop` `= 0.0d0` :	`real(DP), save`
`FlagDExnerDtSurf` `= .true.` :	`logical, save`

This namelist group name is input/output in Surfaceflux_const#Surfaceflux_const_init

surfaceflux_diff_nml( Kappa, FlagDExnerDtSurf )

*NAMELIST* :
`Kappa` `= 800.0d0` :	`real(DP), save`
`FlagDExnerDtSurf` `= .true.` :	`logical, save`

This namelist group name is input/output in Surfaceflux_diff#Surfaceflux_Diff_init

timeset_nml( DelTimeLong, DelTimeShort, IntegPeriod, RestartTime, DelTimeOutput )

NAMELIST :

DelTimeLong = 2.0d0 :

real(DP), save, public

:

長いタイムステップ

DelTimeShort = 2.0d-1 :

real(DP), save, public

:

短いタイムステップ

IntegPeriod = 3600.0d0 :

real(DP), save, public

:

積分時間

RestartTime = 0.0d0 :

real(DP), save, public

:

計算開始時刻

DelTimeOutput = 2.0d0 :

real(DP), save, public

:

出力タイムステップ

This namelist group name is input/output in timeset#timeset_init

turbulence_kw1978_nml( Cm, KmMax, FlagConstTurbCoef, ConstKm, ConstKh, FlagDExnerDtTurb )

NAMELIST :

Cm = 2.0d-1 :

real(DP), save

:	乱流エネルギー診断式の係数

KmMax = 0.0d0 :

real(DP), save

:

最大値

FlagConstTurbCoef : logical, save

ConstKm = 0.0d0 :

real(DP), save

:

定数値

ConstKh = 0.0d0 :

real(DP), save

:

定数値

FlagDExnerDtTurb =.true. : logical, save

This namelist group name is input/output in Turbulence_kw1978#turbulence_kw1978_init

Methods

Public Instance methods