| Class | surface_data |
| In: |
prepare_data/surface_data.f90
|
Note that Japanese and English are described in parallel.
GCM で用いる地表面データを生成します. ファイルへの出力は主プログラムで行うことを想定しています. 現在は暫定的に Hosaka et al. (1998) の SST 分布を与えます.
Surface data for GCM is generated. File output is expected to done by a main program. Now, SST profile in Hosaka et al. (1998) is provided tentatively.
| SurfDataCreate : | SRFDAT 型変数の初期設定 |
| SurfDataGetAxes : | 座標軸データの取得 |
| SurfDataGet : | 地表面データの取得 |
| SurfDataClose : | SRFDAT 型変数の終了処理 |
| SurfDataPutLine : | SRFDAT 型変数に格納されている情報の印字 |
| SurfDataInitialized : | SRFDAT 型変数が初期設定されているか否か |
| ———— : | ———— |
| SurfDataCreate : | Constructor of "SRFDAT" |
| SurfDataGetAxes : | Get axes data |
| SurfDataGet : | Get surface data |
| SurfDataClose : | Deconstructor of "SRFDAT" |
| SurfDataPutLine : | Print information of "SRFDAT" |
| SurfDatainitialized : | Check initialization of "SRFDAT" |
始めに, SRFDAT 型の変数を定義し, SurfDataCreate で初期設定を行います. 初期設定後, SurfDataGet によって地表面データを読み込んでください. 軸データを読み込む場合には SurfDataGetAxes を用いてください. 最後に, SRFDAT 型の変数の終了処理を SurfDataClose にて行います.
First, initialize "SRFDAT" by "SurfDataCreate". Then, get surface data by "SurfDataGet". If axes data is needed, get it by "SurfDataGetAxes". Finally, terminate "SRFDAT" by "SurfDataClose".
| Derived Type : | |||
| initialized = .false. : | logical
| ||
| pattern : | character(TOKEN)
| ||
| nmax : | integer
| ||
| imax : | integer
| ||
| jmax : | integer
| ||
| PI : | real(DP)
| ||
| x_Lon(:) =>null() : | real(DP), pointer
| ||
| x_Lon_Weight(:) =>null() : | real(DP), pointer
| ||
| y_Lat(:) =>null() : | real(DP), pointer
| ||
| y_Lat_Weight(:) =>null() : | real(DP), pointer
| ||
| TempBase : | real(DP)
| ||
| xy_SurfTemp(:,:) =>null() : | real(DP), pointer
|
まず, SurfDataCreate で "SRFDAT" 型の変数を初期設定して下さい. 初期化された "SRFDAT" 型の変数を再度利用する際には, SurfDataClose によって終了処理を行ってください.
Initialize "SRFDAT" variable by "SurfDataCreate" before usage. If you reuse "SRFDAT" variable again for another application, terminate by "SurfDataClose".
| Subroutine : | |||
| srf_dat : | type(SRFDAT), intent(inout) | ||
| err : | logical, intent(out), optional
|
SRFDAT 型の変数の終了処理を行います. なお, 与えられた srf_dat が Create によって初期設定 されていない場合, プログラムはエラーを発生させます.
Deconstructor of "SRFDAT". Note that if srf_dat is not initialized by "Create" yet, error is occurred.
subroutine SurfDataClose( srf_dat, err )
!
! SRFDAT 型の変数の終了処理を行います.
! なお, 与えられた *srf_dat* が Create によって初期設定
! されていない場合, プログラムはエラーを発生させます.
!
! Deconstructor of "SRFDAT".
! Note that if *srf_dat* is not initialized by "Create" yet,
! error is occurred.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: STRING, STDOUT
use dc_error, only: StoreError, DC_NOERR, DC_ENOTINIT
implicit none
type(SRFDAT), intent(inout):: srf_dat
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
integer:: stat
character(STRING):: cause_c
character(*), parameter:: subname = 'SurfDataClose'
continue
call BeginSub(subname)
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 初期設定のチェック
! Check initialization
!-----------------------------------------------------------------
if (.not. srf_dat % initialized) then
stat = DC_ENOTINIT
cause_c = 'SRFDAT'
goto 999
end if
!-----------------------------------------------------------------
! "SRFDAT" の設定の消去
! Clear the settings for "DYNSP"
!-----------------------------------------------------------------
deallocate( srf_dat % xy_SurfTemp )
deallocate( srf_dat % x_Lon )
deallocate( srf_dat % x_Lon_Weight )
deallocate( srf_dat % y_Lat )
deallocate( srf_dat % y_Lat_Weight )
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
srf_dat % initialized = .false.
999 continue
call StoreError(stat, subname, err, cause_c)
call EndSub(subname)
end subroutine SurfDataClose
| Subroutine : | |||
| srf_dat : | type(SRFDAT), intent(inout) | ||
| nmax : | integer, intent(in)
| ||
| imax : | integer, intent(in)
| ||
| jmax : | integer, intent(in)
| ||
| PI : | real(DP), intent(in), optional
| ||
| TempBase : | real(DP), intent(in), optional
| ||
| pattern : | character(*), intent(in), optional
| ||
| nmlfile : | character(*), intent(in), optional
| ||
| err : | logical, intent(out), optional
|
SRFDAT 型の変数の初期設定を行います. 他のサブルーチンを使用する前に必ずこのサブルーチンによって SRFDAT 型の変数を初期設定してください.
オプショナル引数 PI は度数をラジアン変換する際に使用されます. この引数を与えない場合, constants モジュールから得られるデフォルト値が使用されます.
なお, 与えられた srf_dat が既に初期設定されている場合, プログラムはエラーを発生させます.
NAMELIST を利用する場合には引数 nmlfile に NAMELIST ファイル名 を与えてください. NAMELIST 変数群の詳細に関しては NAMELIST#surface_data_nml を参照してください.
Constructor of "SRFDAT". Initialize srf_dat by this subroutine, before other procedures are used,
Optinal argument PI is used for conversion of degree into radian. If this argument is not given, default valuse provided by "constants" module is used instead.
Note that if srf_dat is already initialized by this procedure, error is occurred.
In order to use NAMELIST, specify a NAMELIST filename to argument nmlfile. See "NAMELIST#surface_data_nml" for details about a NAMELIST group.
subroutine SurfDataCreate( srf_dat, nmax, imax, jmax, PI, TempBase, pattern, nmlfile, err )
!
! SRFDAT 型の変数の初期設定を行います.
! 他のサブルーチンを使用する前に必ずこのサブルーチンによって
! SRFDAT 型の変数を初期設定してください.
!
! オプショナル引数 *PI* は度数をラジアン変換する際に使用されます.
! この引数を与えない場合,
! constants モジュールから得られるデフォルト値が使用されます.
!
! なお, 与えられた *srf_dat* が既に初期設定されている場合,
! プログラムはエラーを発生させます.
!
! NAMELIST を利用する場合には引数 *nmlfile* に NAMELIST ファイル名
! を与えてください. NAMELIST 変数群の詳細に関しては
! NAMELIST#surface_data_nml を参照してください.
!
! Constructor of "SRFDAT".
! Initialize *srf_dat* by this subroutine,
! before other procedures are used,
!
! Optinal argument *PI* is used for conversion of degree into radian.
! If this argument is not given,
! default valuse provided by "constants" module is used instead.
!
! Note that if *srf_dat* is already initialized
! by this procedure, error is occurred.
!
! In order to use NAMELIST, specify a NAMELIST filename to
! argument *nmlfile*. See "NAMELIST#surface_data_nml"
! for details about a NAMELIST group.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: STRING, STDOUT, DP
use dc_error, only: DC_NOERR, DC_EALREADYINIT, DC_ENEGATIVE, DC_ENOFILEREAD
use dcpam_error, only: StoreError, DCPAM_EBADPATTERN
use constants, only: CONST, Create, Get
use dc_present, only: present_and_not_empty, present_and_true
use dc_string, only: LChar
use dc_message, only: MessageNotify
use w_module, only: w_Initial, x_Lon_spml => x_Lon, y_Lat_spml => y_Lat, x_Lon_Weight_spml => x_Lon_Weight, y_Lat_Weight_spml => y_Lat_Weight
implicit none
type(SRFDAT), intent(inout):: srf_dat
integer, intent(in):: nmax ! 最大全波数.
! Maximum truncated wavenumber
integer, intent(in):: imax ! 経度格子点数.
! Number of grid points in longitude
integer, intent(in):: jmax ! 緯度格子点数.
! Number of grid points in latitude
real(DP), intent(in), optional:: PI ! $ \pi $ . 円周率. Circular constant
real(DP), intent(in), optional:: TempBase
! $ T $ . 温度の基本場. Basic state temperature
character(*), intent(in), optional:: pattern
! 地表面データのパターン.
! 以下のパターンを選択可能.
!
! Surface data pattern.
! Available patterns are as follows.
!
! * "Hosaka et al. (1998)"
! * "Homogeneous"
!
character(*), intent(in), optional :: nmlfile
! NAMELIST ファイルの名称.
! この引数に空文字以外を与えた場合,
! 指定されたファイルから
! NAMELIST 変数群を読み込みます.
! ファイルを読み込めない場合にはエラーを
! 生じます.
!
! NAMELIST 変数群の詳細に関しては
! NAMELIST#surface_data_nml
! を参照してください.
!
! NAMELIST file name.
! If nonnull character is specified to
! this argument,
! NAMELIST group name is loaded from the
! file.
! If the file can not be read,
! an error occurs.
!
! See "NAMELIST#surface_data_nml"
! for details about a NAMELIST group.
!
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
!-----------------------------------
! 作業変数 (Hosaka et al. (1998))
! Work variables (Hosaka et al. (1998))
real(DP):: TempEq ! 赤道上 (正確には LatCenter 上) での温度.
! Temperature on the equator
! (on LatCenter, to be exact)
real(DP):: LatCenter ! 温度最高の緯度.
! Latitude on which temperature is maximum.
real(DP):: LatFlatWidth ! 温度が平坦化される緯度幅.
! Latitude width in which temperature is flattened
integer:: jp
integer:: jm
real(DP):: LatA, Alpha, Beta, Gamma
real(DP):: Phi1, AlphaBeta4, Phi, LatAPlus, LatAMinus
real(DP):: SurfTempMx
real(DP):: xy_SurfTemp (0:imax-1, 0:jmax-1)
real(DP):: y_Lat (0:jmax-1)
! 緯度. Latitude
!-----------------------------------
! 作業変数
! Work variables
type(CONST):: const_earth
integer:: j ! DO ループ用作業変数
! Work variables for DO loop
integer:: stat
character(STRING):: cause_c
character(*), parameter:: subname = 'SurfDataCreate'
continue
call BeginSub(subname, version)
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 初期設定のチェック
! Check initialization
!-----------------------------------------------------------------
if (srf_dat % initialized) then
stat = DC_EALREADYINIT
cause_c = 'SRFDAT'
goto 999
end if
!-----------------------------------------------------------------
! 格子点の設定
! Configure grid point
!-----------------------------------------------------------------
srf_dat % nmax = nmax
srf_dat % imax = imax
srf_dat % jmax = jmax
!-----------------------------------------------------------------
! 初期値データのパターンを引数から取得
! Get initial data pattern from argument
!-----------------------------------------------------------------
if ( present(pattern) ) then
srf_dat % pattern = pattern
else
srf_dat % pattern = ''
end if
!---------------------------------------------------------
! 物理定数の準備
! Prepare physical constants
!---------------------------------------------------------
call Create( const_earth ) ! (inout)
call Get( constant = const_earth, PI = srf_dat % PI ) ! (out)
if ( present(PI) ) srf_dat % PI = PI
if ( present(TempBase) ) then
srf_dat % TempBase = TempBase
else
srf_dat % TempBase = 302.0_DP
end if
!-----------------------------------------------------------------
! NAMELIST からの値を取得
! Get values from NAMELIST
!-----------------------------------------------------------------
if ( present_and_not_empty(nmlfile) ) then
call MessageNotify( 'M', subname, 'Loading NAMELIST file "%c" ...', c1=trim(nmlfile) )
call NmlRead ( nmlfile = nmlfile, TempBase = srf_dat % TempBase, pattern_ = srf_dat % pattern, err = err ) ! (out)
if ( present_and_true(err) ) then
call MessageNotify( 'W', subname, '"%c" can not be read.', c1=trim(nmlfile) )
stat = DC_ENOFILEREAD
cause_c = nmlfile
goto 999
end if
end if
!-----------------------------------------------------------------
! 引数の正当性のチェック
! Validation of arguments
!-----------------------------------------------------------------
if (srf_dat % nmax < 1) then
stat = DC_ENEGATIVE
cause_c = 'nmax'
goto 999
end if
if (srf_dat % imax < 1) then
stat = DC_ENEGATIVE
cause_c = 'imax'
goto 999
end if
if (srf_dat % jmax < 1) then
stat = DC_ENEGATIVE
cause_c = 'jmax'
goto 999
end if
!-----------------------------------------------------------------
! 地表面データのパターン
! Surface data pattern
!-----------------------------------------------------------------
if ( trim(srf_dat % pattern) == '' ) then
srf_dat % pattern = 'Hosaka et al. (1998)' ! 現在は暫定的に Hosaka et al. (1998) をデフォルトにする
else
select case ( LChar( trim(srf_dat % pattern) ) )
case ( 'hosaka et al. (1998)' )
case ( 'homogeneous' )
case default
stat = DCPAM_EBADPATTERN
cause_c = trim(srf_dat % pattern)
goto 999
end select
end if
!-----------------------------------------------------------------
! 座標軸データ作成
! Create axes data
!-----------------------------------------------------------------
call w_Initial( srf_dat % nmax, srf_dat % imax, srf_dat % jmax )
allocate( srf_dat % x_Lon (0:srf_dat%imax-1) )
srf_dat % x_Lon = x_Lon_spml
allocate( srf_dat % x_Lon_Weight (0:srf_dat%imax-1) )
srf_dat % x_Lon_Weight = x_Lon_Weight_spml
allocate( srf_dat % y_Lat (0:srf_dat%jmax-1) )
srf_dat % y_Lat = y_Lat_spml
y_Lat = srf_dat % y_Lat
allocate( srf_dat % y_Lat_Weight (0:srf_dat%jmax-1) )
srf_dat % y_Lat_Weight = y_Lat_Weight_spml
!-----------------------------------------------------------------
! 地表面データ作成
! Create surface data
!-----------------------------------------------------------------
select case ( LChar( trim(srf_dat % pattern) ) )
case ( 'homogeneous' )
allocate( srf_dat % xy_SurfTemp(0:srf_dat%imax-1, 0:srf_dat%jmax-1) )
srf_dat % xy_SurfTemp = srf_dat % TempBase
case ( 'hosaka et al. (1998)' )
TempEq = srf_dat % TempBase
LatCenter = 0.0_DP
LatFlatWidth = 7.0_DP
LatA = 30.0_DP
Alpha = 60.0_DP
Beta = 32.0_DP
Gamma = 0.0_DP
Phi1 = abs( LatA * PI / 180.0_DP )
AlphaBeta4 = 2.0_DP *( Phi1**3 ) * ( Beta / Alpha )
do j = 0, jmax - 1
Phi = abs( y_Lat(j) - LatCenter * PI / 180.0_DP )
xy_SurfTemp (:,j) = TempEq - Alpha / 2.0_DP * ( Phi - max( sqrt( Phi1**2 + AlphaBeta4 ) - sqrt( ( Phi - Phi1 )**2 + AlphaBeta4 ), 0.0_DP ) ) + Gamma * ( Phi**3 )
end do
!----- 中心 LatCenter +/- LatFlatWidth の間を平坦に ------
if ( LatFlatWidth < 0.0_DP ) then
LatFlatWidth = - LatFlatWidth
end if
LatAPlus = ( LatCenter + LatFlatWidth ) * PI / 180.0_DP
LatAMinus = ( LatCenter - LatFlatWidth ) * PI / 180.0_DP
jp = 0
jm = jmax - 1
do j = 0, jmax - 1
if ( y_Lat(j) <= LatAPlus ) then
jp = j
if ( j == jmax - 1 ) jp = jp - 1
end if
if ( y_Lat(j) < LatAMinus ) then
jm = j
if ( j == jmax - 1 ) jm = jm - 1
end if
end do
SurfTempMx = ( xy_SurfTemp(1,jm) * ( y_Lat(jm+1) - LatAMinus ) + xy_SurfTemp(1,jm+1) * ( LatAMinus - y_Lat(jm) ) ) / ( y_Lat(jm+1) - y_Lat(jm) )
xy_SurfTemp(:,jm+1:jp) = SurfTempMx
allocate( srf_dat % xy_SurfTemp(0:srf_dat%imax-1, 0:srf_dat%jmax-1) )
srf_dat % xy_SurfTemp = xy_SurfTemp
end select
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
srf_dat % initialized = .true.
999 continue
call StoreError(stat, subname, err, cause_c)
call EndSub(subname)
end subroutine SurfDataCreate
| Subroutine : | |||
| srf_dat : | type(SRFDAT), intent(inout) | ||
| xy_SurfTemp(0:srf_dat%imax-1, 0:srf_dat%jmax-1) : | real(DP), intent(out)
| ||
| err : | logical, intent(out), optional
|
GCM 用の地表面データを返します.
なお, 与えられた srf_dat が Create によって初期設定 されていない場合, プログラムはエラーを発生させます.
Return surface data for GCM.
If srf_dat is not initialized by "Create" yet, error is occurred.
subroutine SurfDataGet( srf_dat, xy_SurfTemp, err )
!
! GCM 用の地表面データを返します.
!
! なお, 与えられた *srf_dat* が Create によって初期設定
! されていない場合, プログラムはエラーを発生させます.
!
! Return surface data for GCM.
!
! If *srf_dat* is not initialized by "Create" yet,
! error is occurred.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: STRING, STDOUT, DP
use dc_error, only: StoreError, DC_NOERR, DC_ENOTINIT
implicit none
type(SRFDAT), intent(inout):: srf_dat
real(DP), intent(out):: xy_SurfTemp (0:srf_dat%imax-1, 0:srf_dat%jmax-1)
! 地表面温度.
! Surface temperature
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
integer:: stat
character(STRING):: cause_c
character(*), parameter:: subname = 'SurfDataGet'
continue
call BeginSub(subname)
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 初期設定のチェック
! Check initialization
!-----------------------------------------------------------------
if (.not. srf_dat % initialized) then
stat = DC_ENOTINIT
cause_c = 'SRFDAT'
goto 999
end if
!-----------------------------------------------------------------
! 地表面データの取り出し
! Fetch surface data
!-----------------------------------------------------------------
xy_SurfTemp = srf_dat % xy_SurfTemp
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
999 continue
call StoreError(stat, subname, err, cause_c)
call EndSub(subname)
end subroutine SurfDataGet
| Subroutine : | |||
| srf_dat : | type(SRFDAT), intent(inout) | ||
| x_Lon(0:srf_dat % imax-1) : | real(DP), intent(out), optional
| ||
| x_Lon_Weight(0:srf_dat%imax-1) : | real(DP), intent(out), optional
| ||
| y_Lat(0:srf_dat % jmax-1) : | real(DP), intent(out), optional
| ||
| y_Lat_Weight(0:srf_dat%jmax-1) : | real(DP), intent(out), optional
| ||
| err : | logical, intent(out), optional
|
座標軸データを返します.
なお, 与えられた srf_dat が Create によって初期設定 されていない場合, プログラムはエラーを発生させます.
Return axes data.
If srf_dat is not initialized by "Create" yet, error is occurred.
subroutine SurfDataGetAxes( srf_dat, x_Lon, x_Lon_Weight, y_Lat, y_Lat_Weight, err )
!
! 座標軸データを返します.
!
! なお, 与えられた *srf_dat* が Create によって初期設定
! されていない場合, プログラムはエラーを発生させます.
!
! Return axes data.
!
! If *srf_dat* is not initialized by "Create" yet,
! error is occurred.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: STRING, STDOUT, DP
use dc_error, only: StoreError, DC_NOERR, DC_ENOTINIT
implicit none
type(SRFDAT), intent(inout):: srf_dat
real(DP), intent(out), optional:: x_Lon (0:srf_dat % imax-1)
! 経度. Longitude
real(DP), intent(out), optional:: x_Lon_Weight (0:srf_dat%imax-1)
! 経度積分用座標重み.
! Weight for integration in longitude
real(DP), intent(out), optional:: y_Lat (0:srf_dat % jmax-1)
! 緯度. Latitude
real(DP), intent(out), optional:: y_Lat_Weight (0:srf_dat%jmax-1)
! 緯度積分用座標重み.
! Weight for integration in latitude
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
integer:: stat
character(STRING):: cause_c
character(*), parameter:: subname = 'SurfDataGetAxes'
continue
call BeginSub(subname)
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 初期設定のチェック
! Check initialization
!-----------------------------------------------------------------
if (.not. srf_dat % initialized) then
stat = DC_ENOTINIT
cause_c = 'SRFDAT'
goto 999
end if
!-----------------------------------------------------------------
! 地表面データの取り出し
! Fetch surface data
!-----------------------------------------------------------------
if ( present(x_Lon ) ) x_Lon = srf_dat % x_Lon
if ( present(x_Lon_Weight) ) x_Lon_Weight = srf_dat % x_Lon_Weight
if ( present(y_Lat ) ) y_Lat = srf_dat % y_Lat
if ( present(y_Lat_Weight) ) y_Lat_Weight = srf_dat % y_Lat_Weight
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
999 continue
call StoreError(stat, subname, err, cause_c)
call EndSub(subname)
end subroutine SurfDataGetAxes
| Function : | |
| result : | logical |
| srf_dat : | type(SRFDAT), intent(in) |
srf_dat が初期設定されている場合には .true. が, 初期設定されていない場合には .false. が返ります.
If srf_dat is initialized, .true. is returned. If srf_dat is not initialized, .false. is returned.
logical function SurfDataInitialized( srf_dat ) result(result)
!
! *srf_dat* が初期設定されている場合には .true. が,
! 初期設定されていない場合には .false. が返ります.
!
! If *srf_dat* is initialized, .true. is returned.
! If *srf_dat* is not initialized, .false. is returned.
!
implicit none
type(SRFDAT), intent(in):: srf_dat
continue
result = srf_dat % initialized
end function SurfDataInitialized
| Subroutine : | |||
| srf_dat : | type(SRFDAT), intent(inout) | ||
| unit : | integer, intent(in), optional
| ||
| indent : | character(*), intent(in), optional
| ||
| err : | logical, intent(out), optional
|
引数 srf_dat に設定されている情報を印字します. デフォルトではメッセージは標準出力に出力されます. unit に装置番号を指定することで, 出力先を変更することが可能です.
Print information of srf_dat. By default messages are output to standard output. Unit number for output can be changed by unit argument.
subroutine SurfDataPutLine( srf_dat, unit, indent, err )
!
! 引数 *srf_dat* に設定されている情報を印字します.
! デフォルトではメッセージは標準出力に出力されます.
! *unit* に装置番号を指定することで, 出力先を変更することが可能です.
!
! Print information of *srf_dat*.
! By default messages are output to standard output.
! Unit number for output can be changed by *unit* argument.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: STRING, STDOUT
use dc_error, only: StoreError, DC_NOERR, DC_ENOTINIT
use dc_string, only: Printf, PutLine
implicit none
type(SRFDAT), intent(inout):: srf_dat
integer, intent(in), optional:: unit
! 出力先の装置番号.
! デフォルトの出力先はは標準出力.
!
! Unit number for output.
! Default value is standard output.
character(*), intent(in), optional:: indent
! 表示されるメッセージの字下げ.
!
! Indent of displayed messages.
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
integer:: stat
character(STRING):: cause_c
integer:: out_unit
integer:: indent_len
character(STRING):: indent_str
character(*), parameter:: subname = 'SurfDataPutLine'
continue
call BeginSub(subname)
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 初期設定のチェック
! Check initialization
!-----------------------------------------------------------------
if (present(unit)) then
out_unit = unit
else
out_unit = STDOUT
end if
indent_len = 0
indent_str = ''
if (present(indent)) then
if (len(indent) /= 0) then
indent_len = len(indent)
indent_str(1:indent_len) = indent
end if
end if
!-----------------------------------------------------------------
! "SRFDAT" の設定の印字
! Print the settings for "SRFDAT"
!-----------------------------------------------------------------
if (srf_dat % initialized) then
call Printf( out_unit, indent_str(1:indent_len) // '#<SRFDAT:: @initialized=%y @pattern="%c"', c1 = trim( srf_dat % pattern ), l = (/srf_dat % initialized/))
call Printf( out_unit, indent_str(1:indent_len) // ' @nmax=%d @imax=%d @jmax=%d', i = (/srf_dat % nmax, srf_dat % imax, srf_dat % jmax/) )
call Printf( out_unit, indent_str(1:indent_len) // ' @PI=%f', d = (/srf_dat % PI/) )
call PutLine( srf_dat % x_Lon, unit = out_unit, lbounds = lbound(srf_dat % x_Lon), ubounds = ubound(srf_dat % x_Lon), indent = indent_str(1:indent_len) // ' @x_Lon=' )
call PutLine( srf_dat % y_Lat, unit = out_unit, lbounds = lbound(srf_dat % y_Lat), ubounds = ubound(srf_dat % y_Lat), indent = indent_str(1:indent_len) // ' @y_Lat=' )
call PutLine( srf_dat % xy_SurfTemp, unit = out_unit, lbounds = lbound(srf_dat % xy_SurfTemp), ubounds = ubound(srf_dat % xy_SurfTemp), indent = indent_str(1:indent_len) // ' @xy_SurfTemp=' )
call Printf(out_unit, indent_str(1:indent_len) // '>' )
else
call Printf( out_unit, indent_str(1:indent_len) // '#<SRFDAT:: @initialized=%y>', l = (/srf_dat % initialized/))
end if
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
999 continue
call StoreError(stat, subname, err, cause_c)
call EndSub(subname)
end subroutine SurfDataPutLine
| Subroutine : | |||||||||||
| nmlfile : | character(*), intent(in)
| ||||||||||
| TempBase : | real(DP), intent(inout)
| ||||||||||
| pattern_ : | character(*), intent(inout) | ||||||||||
| err : | logical, intent(out), optional
|
NAMELIST ファイル nmlfile から値を入力するための 内部サブルーチンです. Create 内で呼び出されることを 想定しています.
値が NAMELIST ファイル内で指定されていない場合には, 入力された値がそのまま返ります.
なお, nmlfile に空文字が与えられた場合, または 与えられた nmlfile を読み込むことができない場合, プログラムはエラーを発生させます.
This is an internal subroutine to input values from NAMELIST file nmlfile. This subroutine is expected to be called by "Create".
A value not specified in NAMELIST file is returned without change.
If nmlfile is empty, or nmlfile can not be read, error is occurred.
This procedure input/output NAMELIST#surface_data_nml .
Alias for SurfDataNmlRead
| Subroutine : | |||||||||||
| nmlfile : | character(*), intent(in)
| ||||||||||
| TempBase : | real(DP), intent(inout)
| ||||||||||
| pattern_ : | character(*), intent(inout) | ||||||||||
| err : | logical, intent(out), optional
|
NAMELIST ファイル nmlfile から値を入力するための 内部サブルーチンです. Create 内で呼び出されることを 想定しています.
値が NAMELIST ファイル内で指定されていない場合には, 入力された値がそのまま返ります.
なお, nmlfile に空文字が与えられた場合, または 与えられた nmlfile を読み込むことができない場合, プログラムはエラーを発生させます.
This is an internal subroutine to input values from NAMELIST file nmlfile. This subroutine is expected to be called by "Create".
A value not specified in NAMELIST file is returned without change.
If nmlfile is empty, or nmlfile can not be read, error is occurred.
This procedure input/output NAMELIST#surface_data_nml .
subroutine SurfDataNmlRead( nmlfile, TempBase, pattern_, err )
!
! NAMELIST ファイル *nmlfile* から値を入力するための
! 内部サブルーチンです. Create 内で呼び出されることを
! 想定しています.
!
! 値が NAMELIST ファイル内で指定されていない場合には,
! 入力された値がそのまま返ります.
!
! なお, *nmlfile* に空文字が与えられた場合, または
! 与えられた *nmlfile* を読み込むことができない場合,
! プログラムはエラーを発生させます.
!
! This is an internal subroutine to input values from
! NAMELIST file *nmlfile*. This subroutine is expected to be
! called by "Create".
!
! A value not specified in NAMELIST file is returned
! without change.
!
! If *nmlfile* is empty, or *nmlfile* can not be read,
! error is occurred.
!
use dc_trace, only: BeginSub, EndSub
use dc_types, only: DP, STRING, TOKEN, STDOUT
use dc_iounit, only: FileOpen
use dc_message, only: MessageNotify
use dc_present, only: present_and_true
use dc_error, only: StoreError, DC_NOERR, DC_ENOFILEREAD
implicit none
character(*), intent(in):: nmlfile
! NAMELIST ファイルの名称.
! NAMELIST file name
!!$ integer, intent(inout):: nmax ! 最大全波数.
!!$ ! Maximum truncated wavenumber
!!$ integer, intent(inout):: imax ! 経度格子点数.
!!$ ! Number of grid points in longitude
!!$ integer, intent(inout):: jmax ! 緯度格子点数.
!!$ ! Number of grid points in latitude
!!$ real(DP), intent(inout), optional:: PI ! $ \pi $ . 円周率. Circular constant
real(DP), intent(inout):: TempBase
! $ T $ . 温度の基本場. Basic state temperature
character(*), intent(inout):: pattern_
character(TOKEN):: pattern
! 地表面データのパターン.
! 以下のパターンを選択可能.
!
! Surface data pattern.
! Available patterns are as follows.
!
! * "Hosaka et al. (1998)"
! * "Homogeneous"
!
logical, intent(out), optional:: err
! 例外処理用フラグ.
! デフォルトでは, この手続き内でエラーが
! 生じた場合, プログラムは強制終了します.
! 引数 *err* が与えられる場合,
! プログラムは強制終了せず, 代わりに
! *err* に .true. が代入されます.
!
! Exception handling flag.
! By default, when error occur in
! this procedure, the program aborts.
! If this *err* argument is given,
! .true. is substituted to *err* and
! the program does not abort.
namelist /surface_data_nml/ TempBase, pattern
! surface_data モジュール用
! NAMELIST 変数群名.
!
! surface_data#Create を使用する際に,
! オプショナル引数 *nmlfile* へ NAMELIST
! ファイル名を指定することで, そのファイルから
! この NAMELIST 変数群を読み込みます.
!
! NAMELIST group name for
! "surface_data" module.
!
! If a NAMELIST filename is specified to
! an optional argument *nmlfile*
! when "surface_data#Create" is used,
! this NAMELIST group is loaded from
! the file.
!-----------------------------------
! 作業変数
! Work variables
integer:: stat
character(STRING):: cause_c
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
character(*), parameter:: subname = 'SurfDataNmlRead'
continue
call BeginSub( subname )
stat = DC_NOERR
cause_c = ''
!-----------------------------------------------------------------
! 文字型引数を NAMELIST 変数群へ代入
! Substitute character arguments to NAMELIST group
!-----------------------------------------------------------------
pattern = pattern_
!----------------------------------------------------------------
! NAMELIST ファイルのオープン
! Open NAMELIST file
!----------------------------------------------------------------
call FileOpen( unit = unit_nml, file = nmlfile, mode = 'r', err = err ) ! (out)
if ( present_and_true(err) ) then
stat = DC_ENOFILEREAD
cause_c = nmlfile
goto 999
end if
!-----------------------------------------------------------------
! NAMELIST 変数群の取得
! Get NAMELIST group
!-----------------------------------------------------------------
read( unit = unit_nml, nml = surface_data_nml, iostat = iostat_nml ) ! (out)
if ( iostat_nml == 0 ) then
call MessageNotify( 'M', subname, 'NAMELIST group "%c" is loaded from "%c".', c1='surface_data_nml', c2=trim(nmlfile) )
write(STDOUT, nml = surface_data_nml)
else
call MessageNotify( 'W', subname, 'NAMELIST group "%c" is not found in "%c" (iostat=%d).', c1='surface_data_nml', c2=trim(nmlfile), i=(/iostat_nml/) )
end if
close( unit_nml )
!-----------------------------------------------------------------
! NAMELIST 変数群を文字型引数へ代入
! Substitute NAMELIST group to character arguments
!-----------------------------------------------------------------
pattern_ = pattern
!-----------------------------------------------------------------
! 終了処理, 例外処理
! Termination and Exception handling
!-----------------------------------------------------------------
999 continue
call StoreError( stat, subname, err, cause_c )
call EndSub( subname )
end subroutine SurfDataNmlRead
| Constant : | |
| version = ’$Name: dcpam4-20080626 $’ // ’$Id: surface_data.f90,v 1.11 2008-03-02 14:22:09 morikawa Exp $’ : | character(*), parameter |