地球大気向け放射モデル Ver. 2

radiation model for the Earth‘s atmosphere Ver. 1

Note that Japanese and English are described in parallel.

地球大気向け放射モデル.

This is a radiation model for the Earth‘s atmospehre.

Radiation in the wavenumber range from 0 to 3000 cm-1 is calculated in the routine of long wave radiation. Radiation in the wavenumber range from 1000 to 57143 cm-1 (0.175 to 10 micron) is calculated in the routine of shortwave radiation.

References

Procedures List

RadEarthV2Flux :	放射フラックスの計算
———— :	————
RadEarthV2Flux :	Calculate radiation flux

NAMELIST

NAMELIST#rad_Earth_V2_nml

Methods

CO2MolWeight H2OMolWeight MeanMolWeight RadEarthV2Flux RadEarthV2FluxCore RadEarthV2Init VMRCO2 module_name rad_Earth_V2_inited version xyz_QO3

Included Modules

dc_types dc_message constants gridset gtool_historyauto timeset set_o3 rad_Earth_SW_V2_1 rad_Earth_LW_V2_3 dc_iounit namelist_util set_cloud

Public Instance methods

RadEarthV2Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_CloudCover, xy_SurfTemp, xyr_RadSUwFlux, xyr_RadSDwFlux, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )

Subroutine :

xy_SurfAlbedo(0:imax-1, 1:jmax) : real(DP), intent(in )

xyz_Press(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyr_Press(0:imax-1, 1:jmax, 0:kmax) : real(DP), intent(in )

xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_QH2OVap(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in )

:	$ q $ . 混合比. Mass mixing ratio of constituents (1)

xyz_QH2OLiq(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_QH2OSol(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_CloudCover(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xy_SurfTemp(0:imax-1, 1:jmax) : real(DP), intent(in )

xyr_RadSUwFlux(0:imax-1, 1:jmax, 0:kmax) : real(DP), intent(out)

xyr_RadSDwFlux(0:imax-1, 1:jmax, 0:kmax) : real(DP), intent(out)

xyr_RadLUwFlux(0:imax-1, 1:jmax, 0:kmax) : real(DP), intent(out)

xyr_RadLDwFlux(0:imax-1, 1:jmax, 0:kmax) : real(DP), intent(out)

xyra_DelRadLUwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1) : real(DP), intent(out)

xyra_DelRadLDwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1) : real(DP), intent(out)

[Source]

  subroutine RadEarthV2Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_CloudCover, xy_SurfTemp, xyr_RadSUwFlux, xyr_RadSDwFlux, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )


    ! USE statements
    !

    real(DP), intent(in ) :: xy_SurfAlbedo   (0:imax-1, 1:jmax)
    real(DP), intent(in ) :: xyz_Press       (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyr_Press       (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(in ) :: xyz_Temp        (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_QH2OVap     (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q $ .   混合比. Mass mixing ratio of constituents (1)
    real(DP), intent(in ) :: xyz_QH2OLiq     (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_QH2OSol     (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_CloudCover  (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xy_SurfTemp     (0:imax-1, 1:jmax)
    real(DP), intent(out) :: xyr_RadSUwFlux   (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyr_RadSDwFlux   (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyr_RadLUwFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyr_RadLDwFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyra_DelRadLUwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)
    real(DP), intent(out) :: xyra_DelRadLDwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)

!!$    real(DP):: xyr_RadLUwFlux    (0:imax-1, 1:jmax, 0:kmax)
!!$    real(DP):: xyr_RadLDwFlux    (0:imax-1, 1:jmax, 0:kmax)
!!$    real(DP):: xyra_DelRadLUwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)
!!$    real(DP):: xyra_DelRadLDwFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)


    ! Work variables
    !
    real(DP) :: xyz_DelAtmMass   (0:imax-1, 1:jmax, 1:kmax)

    integer  :: k


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. rad_Earth_V2_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    do k = 1, kmax
      xyz_DelAtmMass(:,:,k) = ( xyr_Press(:,:,k-1) - xyr_Press(:,:,k ) ) / Grav
    end do

    call RadEarthV2FluxCore( xy_SurfAlbedo, xyz_DelAtmMass, xyz_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_CloudCover, xy_SurfTemp, xyr_RadSUwFlux, xyr_RadSDwFlux, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )


  end subroutine RadEarthV2Flux

RadEarthV2Init( )

Subroutine :

This procedure input/output NAMELIST#rad_Earth_V2_nml .

[Source]

  subroutine RadEarthV2Init

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! O3 分布の設定
    ! Set O3 distribution
    !
    use set_o3, only : SetO3Init

    ! 雲量の設定
    ! Set cloud amount
    !
    use set_cloud, only : SetCloudInit

    ! 地球大気向け短波放射モデル Ver. 2.1
    ! short wave radiation model for the Earth's atmosphere Ver. 2.1
    !
    use rad_Earth_SW_V2_1, only: RadEarthSWV21Init

    ! 地球大気向け長波放射モデル Ver. 2.3
    ! long wave radiation model for the Earth's atmosphere Ver. 2.3
    !
    use rad_Earth_LW_V2_3, only : RadEarthLWV23Init


    ! 宣言文 ; Declaration statements
    !

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /rad_Earth_V2_nml/ VMRCO2

!!$      & SWVer, LWVer
          !
          ! デフォルト値については初期化手続 "rad_Earth_V2#RadEarthV2Init"
          ! のソースコードを参照のこと.
          !
          ! Refer to source codes in the initialization procedure
          ! "rad_Earth_V2#RadEarthV2Init" for the default values.
          !

    if ( rad_Earth_V2_inited ) return


    ! Molecular weights of atmosphere, CO2, and H2O
    !
    MeanMolWeight = 28.0d-3
    CO2MolWeight  = 44.0d-3
    H2OMolWeight  = 18.0d-3


    ! デフォルト値の設定
    ! Default values settings
    !
    VMRCO2                = 382.0d-6


!!$    SWVer = 1
!!$    LWVer = 3


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = rad_Earth_V2_nml, iostat = iostat_nml )             ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    ! Allocate a local variable for O3 distribution
    !
    allocate( xyz_QO3(0:imax-1, 1:jmax, 1:kmax) )


    ! Initialization of modules used in this module
    !

    ! O3 分布の設定
    ! Set O3 distribution
    !
    call SetO3Init

    ! 雲の設定
    ! Set cloud
    !
    call SetCloudInit

    ! 地球大気向け短波放射モデル Ver. 2.1
    ! short wave radiation model for the Earth's atmosphere Ver. 2.1
    !
    call RadEarthSWV21Init

    ! 地球大気向け長波放射モデル Ver. 2.3
    ! long wave radiation model for the Earth's atmosphere Ver. 2.3
    !
    call RadEarthLWV23Init


    ! ヒストリデータ出力のためのへの変数登録
    ! Register of variables for history data output
    !
    call HistoryAutoAddVariable( 'CloudCover', (/ 'lon ', 'lat ', 'sig ', 'time' /), 'cloud cover', '1' )


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '  VMRCO2 = %f', d = (/ VMRCO2 /) )
!!$    call MessageNotify( 'M', module_name, 'SWVer = %d', i = (/ SWVer /) )
!!$    call MessageNotify( 'M', module_name, 'LWVer = %d', i = (/ LWVer /) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    rad_Earth_V2_inited = .true.

  end subroutine RadEarthV2Init

Private Instance methods

CO2MolWeight

*Variable* :
`CO2MolWeight` :	`real(DP), save`

H2OMolWeight

*Variable* :
`H2OMolWeight` :	`real(DP), save`

MeanMolWeight

*Variable* :
`MeanMolWeight` :	`real(DP), save`

RadEarthV2FluxCore( xy_SurfAlbedo, xyz_DelAtmMass, xyz_Press, xyz_Temp, xyz_QH2OVap, xyz_QH2OLiq, xyz_QH2OSol, xyz_CloudCover, xy_SurfTemp, xyr_RadSUwFlux, xyr_RadSDwFlux, xyr_RadLUwFlux, xyr_RadLDwFlux, xyra_DelRadLUwFlux, xyra_DelRadLDwFlux )

Subroutine :

xy_SurfAlbedo(0:imax-1, 1:jmax) : real(DP), intent(in )

xyz_DelAtmMass(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_Press(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : real(DP), intent(in )

xyz_QH2OVap(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in )

:	$ q $ . 混合比. Mass mixing ratio of constituents (1)